Dowsil 736 Heat resistant sealant red 90ml tube

SKU: ID5f60951407
Na zalihi

16,34  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Description

DOWSIL™ 736 is a one-component, heat-resistant silicone adhesive and sealant for industrial applications. It is permanently resistant up to 260 °C and can withstand short-term exposure to temperatures up to 315 °C.

Applications
  • Sealing and encapsulation of heating elements in appliances
  • Aerospace gasketing
  • Moving oven belts
  • Industrial ovens
  • Bag filters in smokestacks
  • Other high-temperature applications in bonding, sealing, and coating
Approvals & Certifications
  • Complies with FDA Regulation 21 CFR 177.2600 (suitable for incidental food contact if extractive limits are met)
  • Listed under NSF Standard 51 for direct food contact
  • UL (Underwriters Laboratories) listed
  • Meets MIL-A-46106 Rev. B
Features
  • Single-component silicone sealant
  • Non-sagging and non-dripping
  • Can be applied overhead or on vertical surfaces
  • Resistant up to 260 °C in continuous operation, short-term up to 315 °C
  • Good adhesion to many substrates; primer can improve adhesion
  • Resistant to water, oil, and many chemicals
Suitable Substrates
  • Heat-resistant materials such as silicone
  • Rubber (recommended: roughen surface before application)
  • Glass and ceramics
  • Certain plastics (test compatibility before use)
  • Metals with corrosion-resistant surfaces (Not recommended for copper, brass, zinc, steel, galvanized iron, or magnesium.)
  • Not recommended for: Polyethylene, polypropylene, PTFE, concrete, masonry, or highly oil-containing surfaces
Technical Data
 Temperature Range -65 °C to 260 °C
 Color Red
 Flow/Slump None
 Extrusion Rate (1/8 inch orifice, 90 psi) 390 g/min
 Specific Gravity 1.04
 Skin-over Time 10 minutes
 Tack-free Time 17 minutes
 Cure Time (3 mm thickness) 24 hours
 Hardness, Shore A 26
 Tensile Strength 350 psi
 Elongation 600 %
Application Instructions
  • Ensure the surface is clean, dry, and free of grease. Use appropriate solvents such as acetone or isopropanol for cleaning.
  • For improved adhesion on metal or plastic surfaces, a primer such as DOWSIL™ 1200 Prime Coat can be used.
  • Apply the sealant evenly to the desired surface. A cartridge gun is recommended for precision application.
  • Tooling should be completed within 5 minutes after application before a skin forms.
Storage & Shelf Life
  • Store in a dry place in the unopened original packaging at temperatures, ideally between +5 °C and +30 °C. Avoid direct sunlight.
  • Shelf life: At least 12 months from the date of manufacture.

 

Information on product safety (Manufacturer, Contact)

DOW DEUTSCHLAND ANLAGENGESELLSCHAFT MBH, Rheingaustr. 34, 65201 Wiesbaden, GERMANY, +49 611 237007, [email protected], www.dow.com

Downloads

Additional information

Property

Reviews

There are no reviews yet.

Be the first to review “Dowsil 736 Heat resistant sealant red 90ml tube”

Your email address will not be published. Required fields are marked *