Hylomar AeroGrade PL32M Aerospace gasket and jointing compund 100g

SKU: ID4e6b2bd0b7
Na zalihi

13,14  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

Hylomar aerograde PL32M medium grade gasket & jointing compound for aerospace industry

Hylomar Aerograde is a highly engineered, non-setting and non-hardening gasketing compound for use in the aeronautical industry with a wide operating temperature of -50°C to +250°C. Hylomar Aerograde was developed in conjunction with Rolls Royce – Aerospace Division for sealing joints in turbine engines.
 

  • Hylomar Aerograde PL32 is manufactured under licence from Rolls-Royce PLC to their specification MSRR 9055.
  • There are 3 grades of Hylomar Aerograde PL32 – Light, Medium and Heavy.
Specifications
  • Non-hardening and non-setting
  • Resistant to air, water and oils
  • Specified worldwide by OEM’s
  • Wide operating temperatures (- 50°C to +250°C)
  • Easy to use
  • Unlimited assembly time
  • Easy to disassemble components
  • For use on metal and plastic close fitting components
  • Use as a non-curing thread sealant
  • Resists vibration
  • Easy to apply to vertical and underside joints due to its thixotropic properties
  • Can be used with or without a gasket
Hylomar Aerograde is resistant to:
  • Air, water and oils
  • Turbine and piston engine combustion products
  • Water/glycol and methanol/water mixtures
  • Petroleum and synthetic diester lubricating oils
Technical specifications
  • MEDIUM GRADE
  • Film Thickness: 0.03 mm
  • Typical Surface Finish: 3.0 μm Ra
  • 100g reichen für 1.125m²
  • Product coverage after drying: 4mg/cm²
Hazard warnings
Signal word: Danger

Safety instructions GHS / H-phrases:
H 225: Highly flammable liquid and vapor
H 319: Causes serious eye irritation
H 336: May cause drowsiness or dizziness
Safety instructions GHS / P-phrases:
P 210: Keep away from heat / sparks / open flames / hot surfaces. No smoking.
P 261: Avoid breathing dust / smoke / gas / mist / vapors / spray.
P 280: Wear protective gloves / protective clothing / eye protection / face protection.
P 370+378: In case of fire: use … to extinguish fire.
P 403+233: Keep container tightly closed in a well-ventilated place.
P 501: Dispose of contents/container to … Safety information / EUH phrases:
EUH 066: Repeated exposure may cause skin dryness or cracking

  
Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

 

Information on product safety (Manufacturer, Contact)

HYLOMAR GMBH, Talstraße 106, 41516 Grevenbroich, GERMANY, +49 2182 5708971, [email protected], www.hylomar.com/de

Downloads

Dodatne informacije

Property

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Hylomar AeroGrade PL32M Aerospace gasket and jointing compund 100g”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)