Weicon Copper Paste KP 1000 for high temperatures up to 1100 °C – 1kg

SKU: ID5aeddc9523
Na zalihi

57,06  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

WEICON KP 1000 Copper Paste
  • Protection, release, and lubricant for highly stressed parts at high temperatures
  • High-temperature and corrosion resistant
  • Strong adhesion
  • Sulphur, lead, and nickel-free
  • Temperature resistance: -20 °C to 1100 °C
  • Pack size: 1 kg can
  • Available sizes: 30 g, 120 g, 0.4 kg, 0.45 kg, 0.5 kg, 85 g, 10 kg
Surface pre-treatment
  • To achieve optimum results, the mounting parts should be degreased and cleaned, e.g. with WEICON Surface Cleaner (roughen the surfaces, if required).
  • For used screws, treat with a wire brush and clean with WEICON Cleaner S.
  • WEICON Copper Paste can also be used on uncleaned surfaces, e.g. screws as delivered. However, the cleaner the surface, the better the results achieved.
Processing
  • Clean and degrease surfaces with WEICON Spray Cleaner S.
  • Apply Copper Paste evenly with a brush, cloth, or sponge.
  • For screws, it is important that the Copper Paste is applied down to the thread root and under the screw head to ensure a good sealing effect.
  • To avoid altering the properties, Copper Paste must not be mixed with greases or oils.
  • Copper Paste does not replace oil or grease lubrication.
Storage
  • Keep tightly closed in original packaging.
  • Do not store together with oxidizing agents.
  • Keep container tightly closed and store in a cool, well-ventilated place.
  • Shelf life: 24 months
Instructions for use
  • When using WEICON products, the physical, safety-related, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed.
Technical specification
Consistency classification (DIN 51818)NLGI-Class 1
BaseMineral oil
Solid lubricantCopper powder/Graphite
Density (DIN 51757)1.1 g/cm³
Silicone-freeyes
VKA-Test Good Load (DIN 51350)ON
VKA-Test Weld Load (DIN 51350)3,200 N
VKA-Test Calotte Value (DIN 51350, 1Min/1000N)0 mm
Worked Penetration (DIN ISO 2137)310-340 1/10 mm
Heat Capacity (DIN EN ISO 22007-4)1.713 J/(g-K)
Thermal Conductivity0.392 W/m-K
Dielectric Strength (DIN EN 60243-1 (20°C))1.7 kV/mm
Drop Point (IP 396)+180 °C
Base Oil Viscosity (40°C) (DIN 51562)180 mm²/s
Thermal Diffusivity0.208 mm³/s
Temperature resistance-20 °C to 1.100 °C
Shelf life24 months
ThickenerAlu-Complex-Soap
Friction values
Friction values plain steel (M10 10.9) 
Total friction coefficient0.13 (min. 0.11)
Thread friction coefficient0.14 (min. 0.13)
Head friction coefficient0.12 (min. 0.10)
Friction values V4A (M10 | A4 70) 
Total friction coefficient0.16 (min. 0.13)
Thread friction coefficient0.16 (min. 0.12)
Head friction coefficient0.16 (min. 0.13)
Friction values galvanized steel (M10 | 10.9) 
Total friction coefficient0.10 (min. 0.09)
Thread friction coefficient0.11 (min. 0.10)
Head friction coefficient0.09 (min. 0.08)
Approvals / GuidelinesIMPA-Code: 450888/89/90/91/92

Hazard Information (CLP)

Signal word: Warning

Hazard Statements (H-phrases)
  • H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statements (P-phrases)
Response:
  • P391: Collect spillage.
Storage:
  • Not applicable.
Disposal:
  • P501: Dispose of contents/container in accordance with local regulations.
Prevention:
  • P273: Avoid release to the environment.
Additional Labelling (EUH-phrases)
  • Not applicable.
Other Relevant Information
  • Annex XVII – Restrictions on the manufacture, placing on the market and use of certain dangerous substances: Not applicable.

 

Information on product safety (Manufacturer, Contact)

WEICON GmbH & Co. KG, Königsberger Strasse 255, 48157 Münster, GERMANY, +49 251 9322-0, [email protected], www.weicon.de

Downloads

Dodatne informacije

Property

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Weicon Copper Paste KP 1000 for high temperatures up to 1100 °C – 1kg”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)