Wacker Elastosil E43 Silicone Rubber RTV-1 transparent 310ml catridge

SKU: IDe749b75bb6
Na zalihi

54,20  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

WACKER ELASTOSIL® E43 TRANSPARENT is a one-component, acetoxy-curing and moderately self-levelling RTV-1 silicone adhesive that cures at room temperature upon contact with atmospheric moisture. It forms a durably elastic silicone rubber and adheres well to various substrates including cured silicones.

  • Pack size: 310 ml cartridge
  • Also available in: 90 g tube
Applications
  • FIPG sealing (Formed-In-Place Gaskets – wet type)
  • Bonding in electronics, household appliances and textiles
  • Seam sealing on silicone-coated textiles
  • Small device and appliance assembly
  • General industry, automotive and electronics applications
  • Suitable for cured silicones, glass, metals, plastics, ceramics and powder-coated surfaces
Features
  • Acetoxy-curing RTV-1 system
  • Solvent-free
  • Excellent adhesion without primer, including to cured silicone
  • Moderately self-levelling and thixotropic
  • Temperature resistant from -45 °C to +180 °C
  • Short-term peak resistance up to 200 °C
  • Outstanding mechanical properties
  • UV and weather resistant
Technical Data
Uncured
ColorTransparent
Density (20 °C)1.09 g/cm³
Viscosity (0.5 1/s)250,000 mPa·s
Viscosity (25 1/s)175,000 mPa·s
Skin formation time10 minutes
Curing rate12 h/mm at 23 °C / 50% RH
Cured (14 days, 23 °C, 50% RH, 2 mm)
Density1.10 g/cm³
Hardness Shore A30
Tensile strength6.5 N/mm²
Elongation at break500 %

* All values are typical and not intended for specification purposes.

Processing Instructions
  • Ready-to-use from cartridge
  • Application with manual, pneumatic or electric guns (e.g., 310 ml dispensing gun)
  • Use of suitable nozzles recommended (e.g., standard nozzle)
  • Moisture curing – no heat required
  • Thermal curing only for thin layers < 0.5 mm – otherwise blistering may occur
Safety Notes
  • During curing approx. 4% acetic acid is released – ensure good ventilation
  • Avoid contact with eyes or mucous membranes – rinse with water if necessary
Removal
  • Uncured: remove with white spirit or similar nonpolar solvents
  • Cured: remove mechanically or with silicone remover / swelling agents
Storage & Shelf Life
  • Store in a cool, dry place
  • Minimum shelf life: see batch label (“best use before end”)

WACKER Elastosil E43 Transparent, silicone adhesive, RTV-1, solvent-free

 

Information on product safety (Manufacturer, Contact)

Wacker Chemie AG, Gisela-Stein-Strasse 1, 81671 München, GERMANY, +49 89 6279-0, [email protected], www.wacker.com

Downloads

Dodatne informacije

Property

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Wacker Elastosil E43 Silicone Rubber RTV-1 transparent 310ml catridge”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)