SIKAFLEX® 291i Marine PU sealing and adhesive material 600ml

SKU: ID314e108256
Na zalihi

31,35  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

  • SIKAFLEX® 291i Marine is a sturdy one-component polyurethane sealant that reacts to form an elastomer under the influence of atmospheric moisture.
  • PU sealing and adhesive material for watertight embedding of outdoor carpets and bonding of sound insulation panels to metal, GRP and wood.
  • Processing: Bonding carpets outdoors, soundproofing panels.
  • Sand the adhesive surface with sandpaper (80/100 grain).
  • Remove grinding dust.     
  • Cut the material.     
  • Cover the surface to be covered with tape (masking tape) at the edges, cut
  • Sikaflex 291i film hose 600 ml and apply to the surface to be bonded with a 2 mm notched trowel (plastic notched trowel or metal notched trowel).
  • Insert the covering within 30 minutes, press lightly and evenly, avoiding air pockets.
  • Remove the tape from the edge and seal with Sikaflex if necessary.   
  • Do not enter the area for at least 24 hours.  
  • Remove excess Sikaflex with nitro dilution.     
  • Caution – do not dissolve processed material.
  • Cured Sikaflex can only be removed mechanically (filling, sanding).

Application:

  • Tack-free time* 60 minutes approx.
  • Elongation at break (DIN 53504) > 500%
  • Tensile strength (ISO 37) 1.8 MPa approx.
  • Application temperature +10°C to +40°C
  • Service temperature (continuous)short term (up to 4 hours)-40°C to +90°C+120°C
  • Shelf life (stored below 25°C) 12 months
  • Method of application: Hand- or air-gun

Properties  

  • Color: Black, white, light grey    
  • Sea and freshwater resistant    
  • Aging and weather resistant     
  • Non-corrosive, sandable   
  • Low odor    
  • Electrically non-conductive     
  • Permanently elastic     
  • Temperature resistant from – 40 ° C to + 90 ° C   
  •  Processing temperature + 10 ° C to + 35 ° C  
  • Cure speed 1mm / 12h   
  • Yield 600 ml / approx. 1.5 – 2.0 m²

  


Hazard Statements (CLP)

Exclamation Mark

Signal word: Warning.

Hazard Statements (H-Sentences)
  • H317: May cause an allergic skin reaction.
Precautionary Statements (P-Sentences)
Prevention:
  • P261: Avoid breathing mist or vapour.
  • P280: Wear protective gloves.
Response:
  • P302 + P352: IF ON SKIN: Wash with plenty of water.
Disposal:
  • P501: Dispose of contents/container in accordance with local regulations.
Additional Information:
  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.

 

Information on product safety (Manufacturer, Contact)

Sika Deutschland GmbH, Kornwestheimer Str. 103-107, 70439 Stuttgart, GERMANY, +49 711 8009-0, [email protected], www.sika.com

Dodatne informacije

Colour

Black, White

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “SIKAFLEX® 291i Marine PU sealing and adhesive material 600ml”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)