Castrol Molub-Alloy OG 936 SF HEAVY Open gear compound 300g

Castrol ​Molub-Alloy™ OG 936 SF Heavy Open gear compounds (solvent free) NLGI 0

Castrol Molub-Alloy™ OG 936 SF Heavy (previously called Molub-Alloy 936 SF Heavy) is an open gear lubricant developed specifically for use on heavy-duty equipment in mining and industrial service. Molub-Alloy OG 936 SF Heavy is compounded to give maximum protection to gears and slides on large draglines and shovels while minimizing potential pollutants to the environment.

Application

• Molub-Alloy OG 936 SF Heavy is suitable for use on all types of open gears, racks and pinions and sliding or skidding applications such as draglines and shovels. It can be applied either manually or by heavy duty automatic systems.
• This product is used extensively in mining, construction, onshore drilling operations and on offshore installations, facilitating effective lubrication and protection on:
  • Rack and pinion jacking mechanisms
  • Cantilever skidding systems
  • Mooring winch open gearing and slides
  • FPSO offloading systems
  • Crane slew ring & pinion
  • Exposed threads on penstock valves
  • Heavy-duty top dressing for the ultimate protection of wire ropes

Specifications / Approvals

• Bucyrus International SD 4713 specification (CAT) and Komatsu
  specifications for Open Gear Lubricants.

Advantages

• Formulated to address environmental concerns – it is free of solvents, lead, antimony and Barium
• Forms a tough durable film with a “cushioning” effect, even under extreme pressures and at very slow speeds
• The film resists erosion from rain or sleet, and resists peeling in dusty environments
• The film resists destruction by contaminating oils and greases migrating from nearby mechanisms

Technical specifications

• Density @ 20°C / 59°F kg/m³: 1002
• Consistency NLGI Grade: 0
• Worked Penetration (60 strokes @ 25°C / 77°F) 0.1 mm: 345-360
• Brookfield Viscosity cP: 144,000
• Base Oil Viscosity @ 40°C / 104°F mm²/s:  2030
• Base Oil Viscosity @ 100°C / 212°F mm²/s: 57
• Rust Test (distilled water): Pass
• Copper Corrosion (24 hrs,100°C / 212°F) Rating: 1b
• Volume: 300g
• Also available as: 400ml spray can, 55kg barrel, 190kg barrel
• GLIS number: 15B1D3
• MSDS code: 468617

Additional Information

Molub-Alloy OG 936 SF Heavy is not intended for general use in bushings and bearings except in slow moving, heavily
loaded applications.
Castrol Molub Alloy OG 936 SF HEAVY, Castrol Molub-Alloy OG936 SF HEAVY, Castrol Molub Alloy OG-936 SF HEAVY

Hazard Information (CLP)

Hazard pictogram(s): Exclamation mark
Signal word: Warning

Hazard statements (H-phrases)

• H317 – May cause an allergic skin reaction.

Prevention (P-phrases)

• P280 – Wear protective gloves.
• P261 – Avoid breathing vapor.
• P272 – Contaminated work clothing should not be allowed out of the workplace.

Response

• P302 + P352 + P362 + P364 – IF ON SKIN: Wash with plenty of soap and water. Take off contaminated clothing and wash it before reuse.
• P333 + P313 – If skin irritation or rash occurs: Get medical attention.

Storage and Disposal

• Not applicable (storage).
• P501 – Dispose of contents and container in accordance with all local, regional, national and international regulations.

Additional Relevant Information

• May cause skin defatting.
• Injection injuries under high pressure are a serious medical emergency (see section 4).

23212678

BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, [email protected], www.bp.com