Castrol Tribol CH 1430 Spray High-temperature chain oil 400ml

Castrol Tribol™ CH 1430 Spray (previously called Tribol 1430 Spray) high-temperature chain oil is formulated for the lubrication of oven chains for temperatures up to 240 °C (short term max. 270 °C). The low evaporation tendency of the high-quality aromatic ester synthetic base fluid ensures extended lubrication intervals as well as a clean and economic application.

Application

• Tribol CH 1430 high-temperature chain oil is especially recommended for chain lubrication at temperatures up to 240 °C with short term maximum temperature of 270 °C
• It is used for the lubrication of oven chains in lithographic printing plants and in the coating industry, as well as in drying ovens in the automotive industry.
• It may be applied by drip, spray, splash and pressurized lubricating systems compatible with oils of this viscosity.

Advantages

• The good evaporation characteristics of Tribol 1430 Spray can often reduce the lubricant amount to be applied and/or extend the interval between reapplication
• Reduced applications minimize soiling due to dripping or “blow-off”
• Excellent fluid film and anti-wear properties control chain wear
• Self-cleaning action all but eliminates the need to stop production to periodically clean some equipment
• Tribol 1430 Spray also tends to dissolve and facilitate the removal of carbonaceous residues left by previous lubricants
• Fire and explosion hazards are greatly reduced. The ignition temperature far exceeds that of petroleum products
• Low residue forming properties – any residues formed are still fluid and have lubricating properties
• Compatible with the following sealing materials: Fluoroelastomers, silicone rubber, nitrile rubber (with more than 30%, acrylonitrile) and EPDM-elastomers
• Excellent wetting and adhesive properties
• Cost reductions may be achieved by reduced friction, extended lubrication cycles, reduced soiling, decreased downtime for repairs and maintenance and longer service life of machine components

Technical specifications

• Density at 15°C: 949 kg/m3
• Kinematic Viscosity at 40°C: 150 mm²/s
• Kinematic Viscosity at 100°C: 17.1 mm²/s
• Viscosity Index: 124
• Flash Point – open cup method: 268°C
• Pour Point: -33°C
• Volume: 400ml spray can
• Also available in: 20l canister​, 60l barrel, 208l barrel
• GLIS number: 15E1B3
• MSDS code: 468655

Castrol Tribol CH™ 1430, CH1430, CH-1430

---

Hazards (CLP)

Signal word: Danger

Hazard statements

• H222, H229: Extremely flammable aerosol. Pressurized container: May burst if heated.
• H319: Causes serious eye irritation.

Precautionary statements

Prevention:

• P280: Wear eye protection or face protection.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P264: Wash hands thoroughly after use.

Response:

• P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337 + P313: If eye irritation persists: Get medical advice/attention.

Storage:

• P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Disposal:

• Disposal: Not applicable.

 

Information on product safety (Manufacturer, Contact)

BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, [email protected], www.bp.com