Castrol Tribol GR CLS 2 Long-term grease water-resistant 18kg bucket

Castrol Tribol™ GR CLS 2 (previously called Olit™ CLS) is lithium/calcium based extremely water-resistant high performance bearing grease (NLGI grade 2).

Application

• In highly loaded sliding and rolling bearings.
• Under difficult operating conditions, i.e. lubricating points exposed to weather, humidity, dust and high loads.
• As underwater grease for dredgers, lifting devices etc. in gravel plants and sewage treatment plants.
• For bearing lubrication in the beverage and sugar industries.
• In progressive centralized lubricating systems even under high working pressures above 350 bar.
• Temperature application range: -30 °C (-22 °F) to +120 °C (+248 °F)

Characteristics

• It protects against wear and is optimally suited for long-term application and long re-lubrication intervals. Its extreme resistance against water, caustic soda and detergents guarantees high operational reliability even under aggressive ambient conditions.
• In progressive centralized lubricating systems Tribol GR CLS 2 is easily pumpable and maintains its grease and long-term stability even under high operating pressures above 350 bar

Advantages

• High resistance against: water, detergents and caustic soda
• Optimum sealing of bearings due to water-resistant grease collar
• Excellently pumpable in centralized lubricating systems, no blocking of the distributors
• Aging-resistant and shear-stable
• Long-term stability
• Excellent pressure resistance
• Very good corrosion protection

Technical specifications

• Colour: Beige
• Base oil: Mineral
• Thickener type: Lithium / Calcium
• Worked Penetration (60 strokes @ 25 °C/77 °F) 0.1 mm: 265-295
• Density @ 20 °C/68 °F kg/m³: 905
• Dropping point °C/°F: 150/300
• Water Resistance, Rating: 1
• Volume: 18kg bucket
• Also available in: 400g cartridge, 5kg bucket, 50kg barrel, 180kg barrel
• GLIS number: 15773E
• MSDS code: 468712

Additional information

• Please follow the specifications of the bearing and plant manufacturers.
• Fill rolling bearing only about half-full with Tribol GR CLS 2.
• In case of relubrication, pump grease into the bearing until fresh grease vents.

Description

Castrol Tribol™ GR CLS 2 (previously called Olit™ CLS) protects against wear and is optimally suited for long-term application and long relubrication intervals. Its extreme
resistance against water, caustic soda and detergents guarantees high operational reliability even under aggressive
ambient conditions. In progressive centralized lubricating systems Tribol GR CLS 2 is easily pumpable and maintains
its grease and long-term stability even under high operating pressures above 350 bar.

---

Hazard information (CLP)

Signal word: Warning

Hazard statements (H-codes)

• H319: Causes serious eye irritation.

Precautionary statements (P-codes)

Prevention:

• P280: Wear eye or face protection.
• P264: Wash hands thoroughly after handling.

Response:

• P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337 + P313: If eye irritation persists: Get medical attention.

Additional relevant information

• Defatting to the skin.
• Note: High-pressure applications can cause severe injuries.

 

Information on product safety (Manufacturer, Contact)

BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, [email protected], www.bp.com