Loctite EA 9461 Two Part Epoxy Adhesive for thermoplastics grey 50ml

SKU: ID4178f591a5
Na zalihi

36,05  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Description

LOCTITE® EA 9461 (also known as Hysol 9461) is a 2-part, grey, structural bonding epoxy that cures at room temperature to provide a toughened bond. Its thixotropic properties make it good for gap filling and it provides both high peel and shear strength.

Application
  • Ideal for joining dissimilar substrate materials including metals, engineering thermoplastics and thermoset laminates such as SMC. 
Characteristics
  • Creates a tough bond
  • Thixotropic and non-sagging
  • Good for gap filling
  • High peel and shear strength
Technical Information
 Fixture Time 240 min
 Mix Ratio, by Volume 1 : 1
 Peel Strength, Mild Steel (grit blasted) 10 N/mm
 Technology  Epoxy
 Components Two part – Resin & Hardener
 Viscosity Thixotropic
 Application Bonding

 

Hazard Information (CLP)

Hazard pictogram:

  

Signal word:

  • Warning (Part A) / Danger (Part B)

Hazard statements:

  • H314 Causes severe skin burns and eye damage. (Part B)
  • H315 Causes skin irritation. (Part A)
  • H317 May cause an allergic skin reaction. (Both Parts)
  • H319 Causes serious eye irritation. (Part A)
  • H411 Toxic to aquatic life with long-lasting effects. (Part A)

Precautionary statements:

  • Prevention:
    • P273 Avoid release to the environment. (Part A)
    • P280 Wear protective gloves/protective clothing/eye protection/face protection. (Part B)
  • Response:
    • P302+P352 IF ON SKIN: Wash with plenty of water and soap. (Part A)
    • P303+P361+P353 IF ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse skin with water [or shower]. (Part B)
    • P333+P313 If skin irritation or rash occurs: Get medical advice/attention. (Both Parts)
    • P337+P313 If eye irritation persists: Get medical advice/attention. (Part A)
    • P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. (Part B)
    • P310 Immediately call a POISON CENTER or doctor. (Part B)

Loctite EA9461, Loctite EA-9461

Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

 

Information on product safety (Manufacturer, Contact)

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com

Downloads

Additional information

Property

Reviews

There are no reviews yet.

Be the first to review “Loctite EA 9461 Two Part Epoxy Adhesive for thermoplastics grey 50ml”

Your email address will not be published. Required fields are marked *