Loctite 511 Pipe Thread Sealant low strength white 50ml tube

SKU: ID1da22eea31
Na zalihi

37,70  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Description

LOCTITE® 511 is a white to off-white, low strength, general purpose, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is suitable for all metal fittings and its breakaway torque rating is 6 Nm. Viscosity is 9,000 – 22,000 mPa·s and service temperature -55 to +150ºC. DVGW approved.

  • Pack size: 50 ml tube (Loctite no. 234268)
  • Also available in: 50 ml bottle, 250 ml tube
Application
  • LOCTITE® 511™ is designed for the locking and sealing of metal threaded pipes and fittings.
  • The product cures rapidly when confined in the absence of air between close fitting metal surfaces.
Characteristics
  • Doesn’t creep, shrink or block systems
  • Provides an instant low pressure seal
  • Single component – clean and easy to apply
  • Thixotropic, medium to high viscosity
  • Suitable for all metal fittings up to M80/R3”
  • DVGW approved
Technical specifications
Agency Approvals / Specifications DVGW
Chemical Basis / BaseMethacrylate
Colour White: Off White
Key Characteristics Disassembly: Easy Disassembly,   Thixotropic
Viscosity, Brookfield – RVT, @ 25.0 °C Spindle 6, speed 2.5 rpm 40000.0 – 100000.0 mPa·s (cP)
Viscosity, Brookfield – RVT, @ 25.0 °C Spindle 6, speed 20 rpm 9000.0 – 22000.0 mPa·s (cP)

Hazard Information (CLP)

 

Signal word: Warning.

Hazard Statements (H-codes)
  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements (P-codes)
Prevention:
  • P280: Wear protective gloves.
  • P273: Avoid release to the environment.
  • P261: Avoid breathing vapors.
Response:
  • P302+P352: IF ON SKIN: Wash with plenty of soap and water.
  • P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
  • P337+P313: If eye irritation persists: Get medical advice/attention.
For consumer use only:
  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P501: Dispose of contents/container in accordance with national regulation.
Additional Information
  • None if used properly.
  • Contains no substances classified as PBT, vPvB, or endocrine disruptors.

 

Information on product safety (Manufacturer, Contact)

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com

Downloads

Additional information

Property

Reviews

There are no reviews yet.

Be the first to review “Loctite 511 Pipe Thread Sealant low strength white 50ml tube”

Your email address will not be published. Required fields are marked *