Klüber STABURAGS NBU 12K Rolling and plain bearing grease 400g

SKU: IDd1695e10cc
Isporučivo

178,00  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Isporučivo
Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Category:

Description

STABURAGS NBU 12 K Rolling and plain bearing greases | N° 017085
  • STABURAGS NBU 12 K, 30 K are lubricating greases based on mineral oil and barium complex soap. Both greases offer excellent corrosion protection, resistance to water and ambient media as well as wear protection, load-carrying capacity and resistance to tribocorrosion.
  • Content: 400g cartridge
  • Available in 160g cartridge , 1kg can, 25kg bucket, 180kg barrel
Benefits for your application
  • Good corrosion protection
  • Excellent resistance to ambient media
  • High wear protection
  • Good resistance to tribo-corrosion
  • Good load-carrying capacity
  • Good sealing effect
Application
  • STABURAGS NBU 12 K is suitable for the long-term and lifetime lubrication of medium-speed rolling bearings, e.g. in mechanical engineering, power stations and motors.
  • STABURAGS NBU 30 K is suitable for the long-term and lifetime lubrication of low-speed, highly loaded rolling and plain bearings, mechanical engineering, chemical industry and power stations
Application notes
  • These greases are applied by brush, spatula or conventional metering systems. 
Product data
 Colour space  brown
 Chemical composition, thickener barium complex soap 
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value 245 x 0.1 mm 
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value 275 x 0.1 mm
 Drop point, DIN ISO 2176, IP 396  >= 220 °C 
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D445/ASTM D 7042, 40 °C ca. 220 mm²/s 
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D445/ASTM D 7042, 100 °C ca. 19 mm²/s
 Speed factor (n x dm)  ca. 350000 mm/min
 Low-temperature torque, IP 186, – 15 °C, start  <= 1000 mNm
 Low-temperature torque, IP 186, -15°C, running <= 100 mNm

Hazard Information (CLP)

Signal word: Warning

Hazard Statements (H-phrases)
  • H302 + H332: Harmful if swallowed or inhaled.
  • H317: May cause an allergic skin reaction.
Precautionary Statements (P-phrases)
Prevention:
  • P264: Wash skin thoroughly after handling.
  • P271: Use only outdoors or in a well-ventilated area.
  • P280: Wear protective gloves.
Response:
  • P304 + P340 + P312: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
  • P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
  • P362 + P364: Take off contaminated clothing and wash it before reuse.
Hazardous Components for Labeling
  • Barium salts
  • 4-Ethyl-2-(8-heptadecenyl)-2-oxazolin-4-methanol
  • Pin-2(3)-ene

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Downloads

Reviews

There are no reviews yet.

Be the first to review “Klüber STABURAGS NBU 12K Rolling and plain bearing grease 400g”

Your email address will not be published. Required fields are marked *