Klüber Microlube GB 00 Mineral oil based lubricant grease 1kg
161,00 € cijena bez PDV-a
Pošaljite upit za ovaj proizvod
Imate li pitanja?
+385 98 1777 898Uvijek dostupni
Description
Fluid gear grease
- MICROLUBE GB 00 is a special mineral oil based grease free from solid lubricants. It has a high pressure absorption capacity, provides excellent protection against wear and corrosion, shows good wetting behaviour, water resistance and backflow behaviour.
- Content: 1kg can
- Available in 1kg can, 25kg bucket,
Benefits for your application:
- Fluid gear grease
- High pressure absorption capacity
- Good wear protection
- Good anticorrosion behaviour
- No chanelling in case of immersion lubrication
- Pumpable through centralized systems
Application:
- MICROLUBE GB 00 is suitable for the lubraction of rams in mechanical presses, heavy-duty oiltight spur and bevel gears (e.g. gear motors, small gears), worm gears with steel/ steel components as well as toothed couplings. It is also suitable for the lubrication of slideways, guides and large chain drives.
Application notes:
- MICROLUBE GB 00 is suitable for the immersion lubrication of gears up to a peripheral speed of approx. 4 m/s. Forced-feed lubrication is possible at increased speeds.
- MICROLUBE GB 00 can also be applied through centralized systems.
Product data:
| Article number | 20236 |
| Colour space | red |
| Texture | homogeneous |
| Texture | fibrous |
| Density at 20 °C | approx. 0,93 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 430 x 0,1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 475 x 0,1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | approx. 700 mm²/s |
| Base oil viscosity at 100 °C, calculated value | approx. 35 mm²/s |
| FZG scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage | >= 12 |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | approx. |
As an alternative we recommend Motorex FETT 174 .
Hazard Information (CLP)
Signal word: Warning.
Hazard Statements (H-phrases)
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H411 Toxic to aquatic life with long lasting effects.
Precautionary Statements (P-phrases)
Prevention:
- P264 Wash hands thoroughly after handling.
- P273 Avoid release to the environment.
- P280 Wear protective gloves/ eye protection/ face protection.
Response:
- P333 + P313 If skin irritation or rash occurs: Get medical advice/ attention.
- P337 + P313 If eye irritation persists: Get medical advice/ attention.
- P362 + P364 Take off contaminated clothing and wash it before reuse.
Hazardous Components
- Reaction products of 4-methyl-2-pentanol and diphosphorus pentasulfide, propoxylated, esterified with diphosphorus pentaoxide, and salted by amines, C12-14-tert-alkyl.
- Reaction product of 1,3,4-thiadiazolidine-2,5-dithione, formaldehyde and phenol, heptyl derivatives.
- Benzenesulfonic acid, di-C10-14-alkyl derivs., calcium salts.
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Be the first to review “Klüber Microlube GB 00 Mineral oil based lubricant grease 1kg”
Related products
Klüber Grafloscon C-SG 0 Ultra Operational lubricant 180 Kg drum
14.307,00 € cijena bez PDV-a Isporučivo
Klüber Microlube GB 0 Universal high-performance lubricant 25kg
1.899,00 € cijena bez PDV-a Isporučivo
Recently Viewed Products
Reviews
There are no reviews yet.