Klüberpaste HEL 46-450 High temperature paste 750g can

Klüberpaste HEL 46-450 High-temperature screw paste | N° 089032

• Klüberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.
• Klüberpaste HEL 46-450 is suitable for a temperature range between -40 °C and 1000 °C. In the normal temperature range (i.e. below 200 °C) it shows good anticorrosion behaviour and good water resistance. Above 200 °C it acts as a dry lubricant.
• Temperature range: -40°C to +1000°C 
• Volume: Can 750 g
• Also available in: Tube 70 g, Cartridge 600 g, Bucket 30 kg

Benefits for your application

• Reliable screw connection ensured by constant and sufficient preload force
• Easy release also after long time at high temperature
• Approved in Ford tox. No. 138624

Application

• Screw paste for conventional and high-alloy steels (Cr-Ni steels) up to 1000 °C.
• Lubricating and assembly paste for connections in hot air ducts (e.g. automotive exhaust systems).
• For connecting elements in turbochargers and compressors.

Application notes

• It is important to clean and degrease the contact surfaces thoroughly before applying Klüberpaste HEL 46-450.
• A thin layer of paste is then applied by brush, leather cloth or plastic sponge.
• Klüberpaste HEL 46-450 spreads easily over the entire surface and thus prevents excess lubrication.

Technical Specifications

Hazard Information (CLP)

Signal word: Warning

Hazard Statements (H-Codes)

• H317: May cause an allergic skin reaction.
• H411: Toxic to aquatic life with long-lasting effects.

Precautionary Statements (P-Codes)

Prevention:

• P272: Contaminated work clothing should not be allowed out of the workplace.
• P273: Avoid release to the environment.
• P280: Wear protective gloves.

Response:

• P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
• P362 + P364: Take off contaminated clothing and wash it before reuse.
• P391: Collect spillage.

Hazard-determining component(s)

• 4-Ethyl-2-(8-heptadecenyl)-2-oxazolin-4-methanol

Other Hazards

• This substance/mixture contains no components at concentrations of 0.1 % or more classified as persistent, bioaccumulative, and toxic (PBT) or very persistent and very bioaccumulative (vPvB).

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com