Klüber CENTOPLEX 24 DL Low-temperature grease for bearings 1kg can

SKU: IDee7fc04902
Isporučivo

110,96  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Isporučivo
Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

CENTOPLEX 24 DL Low-temperature grease for rolling and plain bearings | N° 020008
  • CENTOPLEX 24 DL is a low-temperature grease based on mineral oils with good oxidation resistance and a lithium calcium soap.
  • The product’s good mechanical stability enables long-term lubrication at normal temperatures and loads.
  • Volume: 1 kg can 
  • Also available in: 25kg bucket
Benefits for your application
  • Low-temperature grease
  • Dynamically light
  • Long-term lubrication for simple applications
  • Multipurpose grease
Application
  • CENTOPLEX 24 DL can be used as a low-temperature grease in many different plain and rolling bearing applications as well as in lubrication points with low torques and/or high rotational speeds.
  • CENTOPLEX 24 DL has proven successful in the lubrication of door handles and locking mechanisms in motor vehicles, windshield wipers and small gears.
  • For long-term lubrication, temperature at the friction point should be < 70 °C. We will be pleased to advise you on relubrication intervals and quantities. 
Application notes
  • CENTOPLEX 24 DL can be applied by grease gun, brush or spatula. Pumpability via centralised lubricating systems should be checked with the system manufacturer prior to use. The friction point can be cleaned using commercial cleaning agents. 
Technical specifications
 Article number 020008
 Composition, thickener lithium-calcium soap
 Composition, type of oil  mineral oil
 Colour space brown
 Service temperature, lower limit -35 °C
 Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 280 0.1 mm
 Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 310 0.1 mm
 Copper corrosion, DIN 51811, 24 h, 80°C 1 – 80 – 24 corrosion degree
 Oil separation, DIN 51817 N, 168 h, 40°C ≤ 6 % by weight
 Flow pressure, DIN 51805-2, -45°C ≤ 1400 mbar
 Dropping point, DIN ISO 2176 / IP 396 ≥ 170 °C
 Water resistance, DIN 51807-1, 3 h, 40°C ≤ 1 – 40 rating

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Downloads

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Klüber CENTOPLEX 24 DL Low-temperature grease for bearings 1kg can”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)