Klüber Klübertop TP 36-1300 N Two-component bonded coating 1l bottle

Klübertop TP 36-1300 N Water-miscible two-component bonded coating for sealing rings and coloured elastomers Komp. A | N° 099221

• Klübertop TP 36-1300 N A/B is a colourless two-component bonded coating for elastomers and thermoplastics. It has a low friction coefficient and a high resistance to wear as well as chemical stability.
• As Klübertop TP 36-1300 N A/B forms a nearly colourless dry film, it is particularly suitable for coloured seals and O-rings where increased operational reliability and colour fastness are equally important.
• Komp. A,  as component B use Klübertop TH 03.
• Temperature range: -40°C to +100°C 
• Volume: 1l bottle
• Also available in: 15l bucket

Benefits for your application

• Soft, visually appealing surface
• Reduction of assembly forces
• Can be coloured
• High chemical stability
• High elasticity
• Contains UV indicator (excitation at 300 – 400 nm)

Applications

• Coating of coloured TPE profiles, molded parts
• Reduction of assembly forces for O-rings

Application notes

• Klübertop TP 36-1300 N A/B can be applied by spraying or by brush.
• Spraying:
• Feed pressure: approx. 2 bar
• Nozzle diameter: 0.3 to 0.5 mm
• Recommended coating thickness: approx. 5–10 µm
• Ensure that only oil and water-free compressed air is used.
• As component B use Klübertop TH 03.
• In individual cases, the use of a primer or plasma treatment will improve adhesion.
• Please contact us for further information on how to reduce assembly forces for O-rings.
• Protect from frost and heat.

Technical specifications

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com