Klüber Nosol GBY 2 Special synthetic lubricating grease 1kg can
349,55 € cijena bez PDV-a
Pošaljite upit za ovaj proizvod
+385 98 1777 898Uvijek dostupni
Opis
NOSOL GBY 2 is a fully synthetic lubricating and sealing grease for fittings, especially gas fittings and bearings. It is resistant to water, mineral oil, glycol-water mixtures and aliphatic gaseous and liquid hydrocarbons such as city and long-distance gases, natural gases such as natural gases and petroleum gases as well as their replacement gases as well as propane and propane-butane mixtures. Approvals Tested and approved according to DIN 3536: “Lubricant for gas fittings in domestic installations, in gas distribution and gas transport lines”,
Characteristics
- Extended component life and surface protection due to good adhesion and good resistance to water
- Improved component performance and extended relubrication intervals due to the good sealing effect and resistance to city, long-distance and natural gases as well as aliphatic hydrocarbons
- Increased versatility of application due to the wide operating temperature range
- Tested and approved according to DIN EN 377 Class B and DIN 3536-10-90
DIN designation:
- Lubricant DIN 3536-10-90 and DIN EN 377 Class B.
- DIN-DVGW registration number: NG-5161BU0518.
Application areas
NOSOL GBY 2 is a special lubricating and sealing grease for fittings, radiator construction, in pumps, drilling and dispensing stations as well as in the refineries, chemicals and automotive industries.
Application instructions
- NOSOL GBY 2 can be applied with a spatula, brush or other common application devices.
- The friction and lubrication points should be as bright as possible, i.e. free of oils, grease, hand sweat and dirt particles.
Product data
| NLGI grade, DIN 51818 | 1 |
| Chemical composition, type of oil | mineral oil |
| Chemical composition, type of oil | synthetic hydrocarbon oil |
| Chemical composition, thickener | special lithium soap |
| Chemical composition | UV additive |
| Lower service temperature | -40 °C / -40 °F |
| Upper service temperature | 150 °C / 266 °F |
| Color space | beige |
| Density at 20 °C | approx. 0.88 g/cm³ |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 500 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 40 mm²/s |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 3 000 mPas |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment: rotational viscometer, upper limit value | 5 000 mPas |
| Corrosion inhibiting properties of lubricating greases, DIN51802, (SKF-EMCOR), test duration: 1 week, distilled water | <= 1 corrosion degree |
| Oil separation, ASTM D 6184 [FTMS 791 C 321], after 30h/100 °C | <= 4 % by weight |
| Drop point, DIN ISO 2176 | >= 250 °C |
| Oxidation stability of lubricating greases, ASTM D942, 100 h/99 °C, pressure drop | <= 0.3 bar |
| Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating | <= 1 – 90 |
| Minimum shelf life from the date of manufacture – in a dry, frostfree place and in the unopened original container, approx. | 36 months |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Related products
Klüber BARRIERTA L 55/1 High-temperature long-term grease 180g glas
726,55 € cijena bez PDV-a
Klüber CENTOPLEX 24 DL Low-temperature grease for bearings 1kg can
110,96 € cijena bez PDV-a
Recenzije
Još nema recenzija.