Opis

Synthetic smooth-running grease for linear guides and bearings in clean room production areas

Klübersynth BEM 34-32 is a special high pressure, synthetic, smooth-running grease for use across a wide service temperature range. Its excellent ageing stability allows
extended relubrication intervals or lifetime lubrication to be accomplished
Content: 50g tube
Available in 50g tube, 60g cartridge, 400g cartridge

Benefits for your application

Application

PARALIQ 91 is used as release agent for baking tins and moulds in the food-processing industry. The lubricant can also be used as high-performance needle and sinker oil in textile machines as well as for deep-drawing or bending of packages for the pharmaceutical and foodprocessing industries
This special oil is tried-and-tested as release agent for moulds in blister machines used for the deep-drawing of film (bottom film)

Application note

The low base oil viscosity of Klübersynth BEM 34-32 ensures smooth running of linear guides, ball bushings, ball screws, rolling bearings, plain bearings as well as small gear systems in all sectors which are not subject to high vacuum, high temperatures or aggressive media. Due to the excellent metal adhesion properties, Klübersynth BEM 34-32 achieves
considerably lower wear rates than many PFPE-based greases used under similar application conditions. The product is compatible with most plastic seals and cage materials

Technical specifications

Article number	4127
Chemical composition, thickener	special calcium soap
Chemical composition, type of oil	synthetic hydrocarbon oil
Lower service temperature	-40 °C / -40 °F
Upper service temperature	130 °C / 266 °F
Colour space	beige
Texture	short-fibred
Texture	homogeneous
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	265 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	295 x 0,1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 31 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 5,9 mm²/s
NLGI grade, DIN 51818	2
Speed factor (n x dm)	approx. 1 000 000 mm/min
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value	2 800 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value	5 200 mPas
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water	<= 1 corrosion degree
Drop point, DIN ISO 2176, IP 396	>= 220 °C
Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating	1 – 90
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.	36 months