Klüber HOTEMP 2000 High-temperature lubricating chain oil 5l canister
1.089,98 € cijena bez PDV-a
Pošaljite upit za ovaj proizvod

Imate li pitanja?
+385 98 1777 898Uvijek dostupni
Opis
HOTEMP 2000 High-temperature lubricating oil | N° 002087
- HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
- HOTEMP 2000 is thermally stable and does not decompose into hard, lacquer-like residues that may stiffen or seize chain joints.
- Temperature range: 0°C to +230°C
- Volume: 5l canister
Benefits for your application
- Thermally stable, for use up to approx. 230 °C
- Good adhesion to friction points, long-term lubricating effect and low consumption
- Good creeping and penetration, hence lower consumption and easy application
- Resistant to centrifuging, therefore reduced risk of environmental contamination
- Insoluble in water, good wash-off resistance
Application
- HOTEMP 2000 is used for lubrication points subject to high thermal loads as are common in chains, slideways, gears, wire ropes, guideways or cams. It is not washed off and penetrates well into chain joints and friction points.
- HOTEMP 2000 is preferably used for temperatures up to approx. 230 °C. A durable, load-carrying lubricant film is attained even at these high temperatures.
Application notes
- HOTEMP 2000 can be applied manually by brush or automatically by drip feeders or a spray system. Klüber will be pleased to provide information on suitable equipment.
- HOTEMP 2000 is also available as a spray (Art. No. 081133). When applied, HOTEMP 2000 forms a highly adhesive lubricant film that resists centrifuging and water wash-off.
Technical specifications
| Chemical composition, type of oil | synthetic hydrocarbon oil |
| Chemical composition, type of oil | ester oil |
| Lower service temperature | 0 °C / 32 °F |
| Upper service temperature | 230 °C / 446 °F |
| Appearance | clear |
| Color space | green |
| Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 2 000 mm²/s |
| Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 126 mm²/s |
| Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus | >= 230 °C |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | 60 months |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com






Recenzije
Još nema recenzija.