Castrol Braycote Inertox 500-2 High-temperature grease 600g cartridge

SKU: ID06f7791637
Isporučivo

472,94  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Isporučivo
Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

Castrol Braycote Inertox 500-2 High-temperature grease, NLGI grade 2

Castrol Braycote™ Inertox Range (previously called Castrol Interox™ Range) are chemically and thermally stable hightemperature greases on a fully synthetic basis. There are universally applied for long-term lubrication of rolling and sliding bearings especially when exposed to hostile ambient conditions. The range consists of Braycote Inertox 400-1( previously called Inertox Light), Braycote Inertox 500-2 (previously called Inertox Medium), Braycote Inertox 240-2 (previously called Inertox Medium 150) and Braycote Inertox 2 (previously called Inertox Heavy).

Application
  • For rolling and sliding bearings with extremely extended relubrication intervals such as in:
    • Film stretching machines
    • Tenter frames for textiles
    • Oven carriages in the ceramics industry
  • For high-temperature lubrication of rolling and sliding bearings.
  • Under hostile ambient conditions.
  • Pumpable in central lubrication systems.
  • Temperature application range: -25°C to +260°C (at higher operating temperatures adequate ventilation must be ensured!)
Specifications / Approvals
  • DIN 3536 and DIN EN 377 (DVGW)
Advantages
  • Excellent thermal stability.
  • High wear protection and good load carrying capacity.
  • Good corrosion protection.
  • Non-flammable.
  • Inert
  • Braycote Inertox 500-2 and Braycote Inertox 240-2 are approved for gas devices (DVGW)
Technical specifications
  • Colour: White
  • Base oil: PTFE / Synthetic Oil
  • Density @ 20°C / 68°F kg/m³: 1970
  • Worked Penetration (60 strokes @ 25°C / 77°F) 0.1 mm: 265-295
  • Base Oil Viscosity @ 40°C / 104°F mm²/s: 500
  • Water Resistance: 0
  • Volume: 600g cartridge
  • Also available in: 1kg can
  • GLIS number: 15D68B
  • MSDS code: 468579

Hazard Information (CLP)

Signal word: Danger.

Hazard Statements (H-phrases)
  • H318 – Causes serious eye damage.
Safety Advice (P-phrases)
Prevention:
  • P280 – Wear eye protection or face protection.
Response:
  • P305 + P351 + P338, P310 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Storage:
  • Not applicable.
Disposal:
  • Not applicable.
Additional Relevant Information
  • Hazardous ingredients: Calcium dihydroxide

 

Information on product safety (Manufacturer, Contact)

BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, [email protected], www.bp.com

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Castrol Braycote Inertox 500-2 High-temperature grease 600g cartridge”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)