Loctite SF 7701 Medical device adhesive polyolefin primer 473ml

SKU: ID4b5534fbf6
Na zalihi

500,89  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Description

LOCTITE® SF 7701 is a colorless, solvent-based, medical-device grade primer for making difficult-to-bond substrates and low energy surfaces like polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber suitable for bonding with LOCTITE® instant adhesives. Tested to Henkel’s ISO-10993 biocompatibility protocols. 

  • Size: 473 ml canister
  • Also available in: 52 ml bottle

Application
  • It is only recommended for difficult to bond substrates which include polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials.
  • It is not recommended in assemblies where high peel strength is required.
  • LOCTITE® SF 7701™ is suitable for use in the assembly of disposable medical devices
Characteristics
  • Increases adhesion of LOCTITE® instant adhesives to low surface-energy plastics
  • ISO-10993 biocompatible
  • Fluorescent under UV for quality control
Technical specifications
 Manufacturer number 2171393
 Chemical Type Aliphatic amine
 Color Ultra clear
 Solvent n-Heptane
 Key characteristics Fluorescent
 Active Ingredient Concentration, % 0.08 to 0.12
 Viscosity Very low
 Specific Gravity @ 25 °C 0.68
 Viscosity @ 20 °C, mPa·s (cP)  1.25

Loctite SF7701 , Loctite SF-7701


Hazard Information (CLP)

Signal word: Danger

Hazard Statements (H-phrases)
  • H225: Highly flammable liquid and vapor.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H336: May cause drowsiness or dizziness.
  • H410: Very toxic to aquatic life with long lasting effects.
Prevention (P-phrases)
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P261: Avoid breathing vapors.
  • P273: Avoid release to the environment.
Response
  • P302+P352: IF ON SKIN: Wash with plenty of soap and water.
  • P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor.
  • P331: Do NOT induce vomiting.
Additional Labeling (DPD)
  • F – Highly flammable.
  • Xn – Harmful.
  • N – Dangerous for the environment.
Risk Phrases (R-phrases)
  • R11: Highly flammable.
  • R38: Irritating to skin.
  • R50/53: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
  • R65: Harmful: may cause lung damage if swallowed.
  • R67: Vapors may cause drowsiness and dizziness.
Safety Phrases (S-phrases)
  • S16: Keep away from sources of ignition – No smoking.
  • S23: Do not breathe vapor.
  • S28: After contact with skin, wash immediately with plenty of water.
  • S61: Avoid release to the environment. Refer to special instructions/Safety data sheets.
  • S62: If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.
Additional Information
  • Contains: n-Heptane.
 
Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

 

Information on product safety (Manufacturer, Contact)

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com

Downloads

Additional information

Property

Reviews

There are no reviews yet.

Be the first to review “Loctite SF 7701 Medical device adhesive polyolefin primer 473ml”

Your email address will not be published. Required fields are marked *