Bostik 2402 Neoprene glue + hardener 1 Liter

Neoprene glue + hardener 2402 BOSTIK special rubber on metal 1L. The High Performance Separating Hardener contact adhesive is applied with a brush on natural rubber, neoprene, nitrile, hypalon and laminate. It is used after printing metals with primary.

Characteristics :
 

• Neoprene glue + hardener 2402
• Color: cream
• Packaging: glue 1L + hardener 40ml
• Minimum operating temperature: + 15 ° C
• Drying time: about 10 minutes
• Maximum open time: 45 minutes depending on media porosity, temperature and relative humidity (70% RH max)
• Pot life of the mixture: about 2 hours
• Proportion of the mixture: used after mixing with 4.5% by weight of hardener

Advantages :
 

• Outstanding adhesion to metals
• High resistance to tearing and temperature
• Without tolene

Tips:

• Substrates must be sound, dry, clean, dust-free, degreased and non-friable.

USING ADVICE

Application using a brush or a fine notched spatula. Apply a regular layer of glue on each face to be assembled. Allow the solvents to dry for 10 to 15 minutes. Brush the bonded surfaces with strong pressure for a few seconds (15 to 20 seconds). The catch is immediate and does not allow readjustment. On porous materials, it is advisable to apply a first coat of glue and let it dry for at least an hour. The optimal resistance is obtained after about 24 hours.
 
Use Bostik products with care. Before use, read the label and product information.
 

---

Hazard Warnings (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting harmful effects.
• H225: Highly flammable liquid and vapor.

Additional Labelling (EUH-Phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary Statements (P-phrases)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe vapors.
• P264: Wash face, hands and any exposed skin thoroughly after handling.
• P273: Avoid release to the environment.

Response:

• P370+P378: In case of fire: Use dry chemical, CO₂, water spray or alcohol-resistant foam to extinguish.
• P391: Collect spillage.

Other Information

• For industrial and professional users only.

Other Hazards

• Toxic to aquatic life. Formation of flammable/explosive vapor-air mixtures possible during use.
• This product contains no substances classified as PBT or vPvB.
• This product contains no known or suspected endocrine disruptors.

 

Information on product safety (Manufacturer, Contact)

Bostik SA, 420 rue d’Estienne d’Orves, 92700 Colombes, FRANCE, +33 1 49 00 90 00, [email protected], www.bostik.com