Dowsil 736 Heat resistant sealant red 90ml tube

SKU: ID5f60951407
Na zalihi

12,36  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

DOWSIL™ 736 is a one-component, heat-resistant silicone adhesive and sealant for industrial applications. It is permanently resistant up to 260 °C and can withstand short-term exposure to temperatures up to 315 °C.

Applications
  • Sealing and encapsulation of heating elements in appliances
  • Aerospace gasketing
  • Moving oven belts
  • Industrial ovens
  • Bag filters in smokestacks
  • Other high-temperature applications in bonding, sealing, and coating
Approvals & Certifications
  • Complies with FDA Regulation 21 CFR 177.2600 (suitable for incidental food contact if extractive limits are met)
  • Listed under NSF Standard 51 for direct food contact
  • UL (Underwriters Laboratories) listed
  • Meets MIL-A-46106 Rev. B
Features
  • Single-component silicone sealant
  • Non-sagging and non-dripping
  • Can be applied overhead or on vertical surfaces
  • Resistant up to 260 °C in continuous operation, short-term up to 315 °C
  • Good adhesion to many substrates; primer can improve adhesion
  • Resistant to water, oil, and many chemicals
Suitable Substrates
  • Heat-resistant materials such as silicone
  • Rubber (recommended: roughen surface before application)
  • Glass and ceramics
  • Certain plastics (test compatibility before use)
  • Metals with corrosion-resistant surfaces (Not recommended for copper, brass, zinc, steel, galvanized iron, or magnesium.)
  • Not recommended for: Polyethylene, polypropylene, PTFE, concrete, masonry, or highly oil-containing surfaces
Technical Data
 Temperature Range -65 °C to 260 °C
 Color Red
 Flow/Slump None
 Extrusion Rate (1/8 inch orifice, 90 psi) 390 g/min
 Specific Gravity 1.04
 Skin-over Time 10 minutes
 Tack-free Time 17 minutes
 Cure Time (3 mm thickness) 24 hours
 Hardness, Shore A 26
 Tensile Strength 350 psi
 Elongation 600 %
Application Instructions
  • Ensure the surface is clean, dry, and free of grease. Use appropriate solvents such as acetone or isopropanol for cleaning.
  • For improved adhesion on metal or plastic surfaces, a primer such as DOWSIL™ 1200 Prime Coat can be used.
  • Apply the sealant evenly to the desired surface. A cartridge gun is recommended for precision application.
  • Tooling should be completed within 5 minutes after application before a skin forms.
Storage & Shelf Life
  • Store in a dry place in the unopened original packaging at temperatures, ideally between +5 °C and +30 °C. Avoid direct sunlight.
  • Shelf life: At least 12 months from the date of manufacture.

 

Information on product safety (Manufacturer, Contact)

DOW DEUTSCHLAND ANLAGENGESELLSCHAFT MBH, Rheingaustr. 34, 65201 Wiesbaden, GERMANY, +49 611 237007, [email protected], www.dow.com

Downloads

Dodatne informacije

Property