Klüber Barrierta KL 092 High-temperature and long-term lubricants 1kg

SKU: ID6b3aa91e90
Isporučivo

5.139,82  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Isporučivo
Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Category:

Opis

BARRIERTA KL 092 High-temperature and long-term lubricants with good resistance to low temperatures
  • BARRIERTA is Europe’s oldest high-quality brand of high-temperature lubricants based on perfluorinated polyether oil (PFPE).
  • BARRIERTA K greases enable long-term use under high temperatures and influence of media, while at the same time requiring low running torques at low temperatures. 
  • Temperature range: -65°C to +220°C 
  • Volume: 1kg can
  • Also available in: Bucket 10 kg
Benefits for your application
  • Long component life
    • over a wide service temperature range
    • when exposed to aggressive chemical agents
    • due to a long calculated grease life
  • Improved component performance
    • due to low starting torques even at low temperatures
    • due to resistance to high speeds
    • due to friction values being largely independent of temperature
Applications
  • BARRIERTA K greases are highly suitable for the long-term lubrication of rolling and plain bearings, where only low driving power is available and where long-term stability is required under changing environmental loads.
  • Even at extremely low temperatures, BARRIERTA K greases are soft enough so as not to overload low-power drive units, while on the other hand they withstand temperatures as high as 200°C and beyond.
  • BARRIERTA K greases are used for a wide range of applications as for-life lubricants in automotive, electrical and precision engineering.
Application notes
  • For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 and then Klüberalfa XZ 3-1.
  • Upon cleaning apply clean dry compressed air or hot air to remove any remaining white spirit residues.
Technical specifications
Article number090242
Chemical composition, type of oilPFPE
Chemical composition, solid lubricantPTFE
Lower service temperature-65 °C / -85 °F
Upper service temperature220 °C / 428 °F
Density at 20 °Capprox. 1.94 g/cm³
NLGI grade, DIN 518182
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value3 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value6 000 mPas
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 90 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 24 mm²/s
Speed factor (n x dm)approx. 300 000 mm/min

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Klüber Barrierta KL 092 High-temperature and long-term lubricants 1kg”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)