Klüber Barrierta KM 192 High-temperature and long-term lubricants 1kg

SKU: IDb238a44691
Isporučivo

2.912,58  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Isporučivo
Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Category:

Opis

BARRIERTA KM 192 High-temperature and long-term lubricants with good resistance to low temperatures
  • BARRIERTA is Europe’s oldest high-quality brand of high-temperature lubricants based on perfluorinated polyether oil (PFPE).
  • BARRIERTA K greases enable long-term use under high temperatures and influence of media, while at the same time requiring low running torques at low temperatures. 
  • Temperature range: -50°C to +260°C 
  • Volume: 1kg can
  • Also available in: Bucket 10 kg
Benefits for your application
  • Long component life
    • over a wide service temperature range
    • when exposed to aggressive chemical agents
    • due to a long calculated grease life
  • Improved component performance
    • due to low starting torques even at low temperatures
    • due to resistance to high speeds
    • due to friction values being largely independent of temperature
Applications
  • BARRIERTA K greases are highly suitable for the long-term lubrication of rolling and plain bearings, where only low driving power is available and where long-term stability is required under changing environmental loads.
  • Even at extremely low temperatures, BARRIERTA K greases are soft enough so as not to overload low-power drive units, while on the other hand they withstand temperatures as high as 200°C and beyond.
  • BARRIERTA K greases are used for a wide range of applications as for-life lubricants in automotive, electrical and precision engineering.
Application notes
  • For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 and then Klüberalfa XZ 3-1.
  • Upon cleaning apply clean dry compressed air or hot air to remove any remaining white spirit residues.
Technical specifications
Article number090122
Chemical composition, type of oilPFPE
Chemical composition, solid lubricantPTFE
Lower service temperature-50 °C / -58 °F
Upper service temperature260 °C / 500 °F
Density at 20 °Capprox. 1.90 g/cm³
NLGI grade, DIN 518182
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value4 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value8 000 mPas
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 190 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 34 mm²/s
Speed factor (n x dm)approx. 600 000 mm/min

Hazard Information (CLP)

Signal word: Warning.

Hazard statements (H-statements)
  • H319: Causes serious eye irritation.
Precautionary statements (P-statements)
Prevention:
  • P264: Wash skin thoroughly after handling.
  • P280: Wear eye protection/face protection.
Response:
  • P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P337 + P313: If eye irritation persists: Get medical advice/attention.
 

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Downloads

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Klüber Barrierta KM 192 High-temperature and long-term lubricants 1kg”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)