Klüber Centoplex CX 4/375 AU High-speed grease for gears 25kg

High-speed grease for gears

• CENTOPLEX CX 4/375 AU is a special lubricating grease based on mineral oil and lithium soap. It is a very soft grease of consistency grade 0.
• Size: 25kg bucket
• Available in  400g cartridge, 1kg can, 25kg bucket

Benefits for your application:

• For small gears subject to high peripheral speeds
• Shear stable
• Good oil separation at low temperatures

Application:

• Being a grease of very low consistency CENTOPLEX CX 4/375 AU is suitable for small gears subject to high speeds, especially bevel gears in right angle grinders. At temperatures < 80°C long-term lubrication is possible.

Application notes:

• CENTOPLEX CX 4/375 AU can be applied onto the tooth flanks by brush in order to allow minimum quantity lubrication.
• Lubrication is also possible by providing a grease sump in the gear. Due to the good oil separation, wetting of the lubrication points in gears or bearings is ensured. CENTOPLEX CX 4/375 AU can also be applied through central automatic lubrication systems.

Product data:

Article number	020047
Chemical composition, type of oil	mineral oil
Chemical composition, thickener	lithium soap
Lower service temperature	-30 °C / -22 °F
Upper service temperature	120 °C / 248 °F
Color space	brown
Appearance	almost transparent
Texture	homogeneous
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	355 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	385 x 0.1 mm
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:  1 week, distilled water	<= 1 corrosion degree
Oil separation, DIN 51817 N, after 7 d/40 °C	<= 7 % by weight
Flow pressure of lubricating greases, DIN 51805-2, test temperature: -30 °C	<= 1 400 mbar
Drop point, DIN ISO 2176, IP 396	>= 150 °C
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened  original container, approx.	36 months

 

---

Hazard Information (CLP)

Signal word: Warning

Hazard Statements (H-Statements)

• H317 May cause an allergic skin reaction.

Precautionary Statements (P-Statements)

Prevention:

• P272 Contaminated work clothing should not be allowed out of the workplace.
• P280 Wear protective gloves.

Response:

• P302 + P352 IF ON SKIN: Wash with plenty of water and soap.
• P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
• P362 + P364 Take off contaminated clothing and wash it before reuse.

Labeling Components

• Naphthenic acids, bismuth salts

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com