Klüber Centoplex CX 4/375 High-speed grease for gears 1kg
145,60 € cijena bez PDV-a
Pošaljite upit za ovaj proizvod

Imate li pitanja?
+385 98 1777 898Uvijek dostupni
Opis
High-speed grease for gears
- CENTOPLEX CX 4/375 is a special lubricating grease based on mineral oil and lithium soap. It is a very soft grease of consistency grade 0.
- Content: 1kg can
- Available in 1kg can, 25kg bucket
Benefits for your application:
- For small gears subject to high peripheral speeds
- Shear stable
- Good oil separation at low temperatures
Application:
- Being a grease of very low consistency CENTOPLEX CX 4/375 AU is suitable for small gears subject to high speeds, especially bevel gears in right angle grinders. At temperatures < 80°C long-term lubrication is possible.
Application notes:
- CENTOPLEX CX 4/375 AU can be applied onto the tooth flanks by brush in order to allow minimum quantity lubrication.
- Lubrication is also possible by providing a grease sump in the gear. Due to the good oil separation, wetting of the lubrication points in gears or bearings is ensured. CENTOPLEX CX 4/375 AU can also be applied through central automatic lubrication systems.
Product data:
| Article number | 020047 |
| Chemical composition, type of oil | mineral oil |
| Chemical composition, thickener | lithium soap |
| Lower service temperature | -30 °C / -22 °F |
| Upper service temperature | 120 °C / 248 °F |
| Color space | brown |
| Appearance | almost transparent |
| Texture | homogeneous |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 355 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 385 x 0.1 mm |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water | <= 1 corrosion degree |
| Oil separation, DIN 51817 N, after 7 d/40 °C | <= 7 % by weight |
| Flow pressure of lubricating greases, DIN 51805-2, test temperature: -30 °C | <= 1 400 mbar |
| Drop point, DIN ISO 2176, IP 396 | >= 150 °C |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | 36 months |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com








Recenzije
Još nema recenzija.