Klüber HOTEMP 2000 High-temperature lubricating oil spray 400ml

HOTEMP 2000 Spray

• HOTEMP 2000 Spray is an advanced, synthetic hightemperature lubricant in aerosol form for friction points that are normally lubricated manually.
• Following evaporation of the solvent, HOTEMP 2000 Spray forms an even, thin and highly adhesive lubricant film.
• Content: Aerosol can 400 ml

Benefits for your application:

• High thermal stability
• Good adhesion to friction points, long-term lubricating effect
• Good creeping and penetration, hence lower consumption
• Resistant to centrifuging, therefore reduced risk of contamination
• Insoluble in water, good wash-off resistance

Application:

• HOTEMP 2000 Spray is used for lubrication points subject to high thermal loads as are common in chains, slideways, gears, wire ropes, guideways or cams.
• HOTEMP 2000 Spray is also an ideal lubricant for motorcycle chains (also O-ring chains). It is not washed off and penetrates well into chain joints and friction points.
• HOTEMP 2000 Spray forms a durable, load-carrying lubricant film even at high temperatures. For the ideal service temperature, please refer to the product data.

Application notes:

• Ensure sufficient ventilation when processing HOTEMP 2000 Spray as explosive mixtures may form.
• Do not spray against naked flame or onto hot or incandescent objects. Observe additional instructions for use in material safety data sheet and on can label.
• When applied, HOTEMP 2000 Spray forms a highly adhesive lubricant film that resists centrifuging and water wash-off. It is economical in use thanks to its adjustable nozzle. The spray jet can be changed from vertical to horizontal to ensure application of the right quantity at the desired lubrication point.
• Sprays should not be exposed to direct sunlight and temperatures above 50 °C.

Product data:

Hazard Statements (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: may burst if heated.
• H412: Harmful to aquatic life with long-lasting effects.

Precautionary Statements (P-phrases)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P273: Avoid release to the environment.

Storage:

• P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Additional Labelling (EUH-phrases)

• EUH208: Contains molybdenum trioxide, reaction products with Bis [O,O-bis(2-ethylhexyl)] hydrogen dithiophosphate. May cause allergic reactions.

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com