Klüber ISOFLEX LDS 18 Special A/UV Long-term lubricating grease 1kg

SKU: ID44088c87e2
Isporučivo

406,81  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Isporučivo
Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

Dynamically light long-term lubricating grease

  • ISOFLEX LDS 18 SPECIAL A/UV is a dynamically light longterm grease for rolling and plain bearings. It is based on mineral oil, ester oil and a lithium soap. Crucial performance
    characteristics are ageing and oxidation resistance, corrosion protection and good resistance to water. ISOFLEX LDS 18 SPECIAL A/UV contains a UV indicator for reliable lubricant film
    detection in the event of minimum quantity lubrication
  • Content: 1kg can

Benefits for your application

  • Long service life due to good corrosion protection and resistance to ageing and oxidation enabling cost savings
  • Tried and tested over many years, especially at high speeds and low temperatures
  • Low internal friction of the lubricant for low internally generated heat in the bearing and increased service life

Application

  • Tried and tested for rolling and plain bearings running under low temperatures and/or high speeds. For many years, ISOFLEX LDS 18 SPECIAL A/UV has been used in starter motors and seat belt retractors in cars

Technical specifications

Article number4176
Chemical compositionUV additive
Chemical composition, thickenerlithium soap
Chemical composition, type of oilester oil
Chemical composition, type of oilmineral oil
Upper service temperatureapprox. 120 °C / 248 °F
Lower service temperatureapprox. -50 °C / -58 °F
Colour spaceyellow
Texturehomogeneous
Textureshort-fibred
Density at 20 °Capprox. 0.88 g/cm³
NLGI grade, DIN 518182
Worked penetration, DIN ISO 2137, 25 °C, upper limit value295 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, lower limit value265 x 0,1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 15 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 3,5 mm²/s
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.36 months

 

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Downloads

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Klüber ISOFLEX LDS 18 Special A/UV Long-term lubricating grease 1kg”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)