Klüber ISOFLEX LDS 18 Special A/UV Long-term lubricating grease 1kg
406,81 € cijena bez PDV-a
Pošaljite upit za ovaj proizvod

Imate li pitanja?
+385 98 1777 898Uvijek dostupni
Opis
Dynamically light long-term lubricating grease
- ISOFLEX LDS 18 SPECIAL A/UV is a dynamically light longterm grease for rolling and plain bearings. It is based on mineral oil, ester oil and a lithium soap. Crucial performance
characteristics are ageing and oxidation resistance, corrosion protection and good resistance to water. ISOFLEX LDS 18 SPECIAL A/UV contains a UV indicator for reliable lubricant film
detection in the event of minimum quantity lubrication - Content: 1kg can
Benefits for your application
- Long service life due to good corrosion protection and resistance to ageing and oxidation enabling cost savings
- Tried and tested over many years, especially at high speeds and low temperatures
- Low internal friction of the lubricant for low internally generated heat in the bearing and increased service life
Application
- Tried and tested for rolling and plain bearings running under low temperatures and/or high speeds. For many years, ISOFLEX LDS 18 SPECIAL A/UV has been used in starter motors and seat belt retractors in cars
Technical specifications
| Article number | 4176 |
| Chemical composition | UV additive |
| Chemical composition, thickener | lithium soap |
| Chemical composition, type of oil | ester oil |
| Chemical composition, type of oil | mineral oil |
| Upper service temperature | approx. 120 °C / 248 °F |
| Lower service temperature | approx. -50 °C / -58 °F |
| Colour space | yellow |
| Texture | homogeneous |
| Texture | short-fibred |
| Density at 20 °C | approx. 0.88 g/cm³ |
| NLGI grade, DIN 51818 | 2 |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 295 x 0,1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 265 x 0,1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 15 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 3,5 mm²/s |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | 36 months |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com






Recenzije
Još nema recenzija.