Klüber MICROLUBE GL 261 Special lubricating grease 250ml spray can

Special lubricating greases for boundary friction conditions and tribo-corrosion

• MICROLUBE GL 261 grease is a special lubricating grease on a mineral oil base. It also contains special lithium soap and the MICROLUBE additive package, which ensures a wear-free surface finish. Running-in wear is reduced to a minimum. In addition, the MICROLUBE additive package provides protection in the boundary friction regime, thus preventing tribo-corrosion. MICROLUBE GL 261 grease has the capacity to absorb high pressures, and it has good anti-corrosion properties.
• Content: 250ml spray can
• Available in 250ml spray can, 400g cartridge, 1kg can, 25kg bucket, 180kg barrel

Benefits:

• Optimum lubrication in the boundary friction regime, thus preventing machine downtime due to tribo-corrosion
• Tried-and-tested for many years and approved by OEMs
• Longer component life due to special additives, especially with oscillations and micro-movements
• Trouble-free operation of machines due to good pumpability in central lubrication systems

Application:

• MICROLUBE GL 261 grease is particularly suitable for low to medium-speed plain and rolling bearings, and for swivel movements and vibrations.

Other applications:

• Linear guides
• Serrations, multiple spline shafts
• Small gears, e.g. adjustment gears

It is generally suitable for machine elements potentially subject to tribo-corrosion.

Application notes:

• MICROLUBE GL 261 grease can be precisely applied by brush, spatula, grease gun, and through centralized lubrication systems.

Product data:

Hazard Information (CLP)

Signal word: Danger

Hazard Statements (H-Sets)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: May burst when heated.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Precautionary Statements (P-Sets)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.

Response:

• P301 + P310: IF SWALLOWED: Immediately call Poison Center/Doctor.
• P331: Do NOT induce vomiting.

Storage:

• P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F.

Hazardous Components for Labeling

• Hydrocarbons, C7-C9, Isoalkanes

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com