Klüber Paraliq GB 363 Synthetic grease for valves 370g cartridge
106,34 € cijena bez PDV-a
Pošaljite upit za ovaj proizvod
Imate li pitanja?
+385 98 1777 898Uvijek dostupni
Opis
Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries
- PARALIQ GB 363 offers excellent adhesion and is neutral to beer froth. It is also highly resistant to water and steam.
- PARALIQ GB 363 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of PARALIQ GB 363 can contribute to increase reliability of your production processes. Wenevertheless recommend conducting an additional risk analysis, e.g. HACCP.
- Size: 370g cartridge
- Available in 40g tube, 370g cartridge, 1kg can, 25kg bucket
Benefits
- Reliable operation of beverage taps due to neutrality towards taste and beer froth
- Extended maintenance intervals due to very good resistance to hot and cold water and steam
- NSF H1-registered for higher process reliability
- ISO 21469 certified – supports the compliance with the hygienic requirements in your production. You will find further information about ISO Standard 21469 on our website www.klueber.com.
Application
- PARALIQ GB 363 can be used for beverage taps, especially beer taps of all kind, equipped with NBR seals or other elements made of NBR. It does not impair the formation of beer froth or the taste of beer.
- PARALIQ GB 363 is also suitable for filling installations, filters, stuffing boxes, rubber membranes or seals.
Application notes
- PARALIQ GB 363 can be applied by brush, spatula, grease gun or cartridge.
- Before applying PARALIQ GB 363, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions exist and beer froth formation is not impaired.
Technical specifications
| Article number | 96018 |
| NSF-H1 registration | 056 371 |
| Chemical composition, thickener | silicate |
| Chemical composition, type of oil | synthetic hydrocarbon oil |
| Chemical composition, type of oil | paraffinic mineral oil |
| Lower service temperature | -30 °C / -22 °F |
| Upper service temperature | 140 °C / 284 °F |
| Colour space | beige |
| Density at 20 °C | approx. 0,91 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 215 x 0,1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 245 x 0,1 mm |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 8 000 mPas |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 20 000 mPas |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 2 400 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 156 mm²/s |
| Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating | <= 1 – 90 |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | 36 months |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Budite prvi koji će recenzirati “Klüber Paraliq GB 363 Synthetic grease for valves 370g cartridge”
Related products
Klüber ISOFLEX NBU 15 Mast za ležajeve vretena velike brzine 400 g
246,28 € cijena bez PDV-a Isporučivo
Klüber BARRIERTA L 55/1 Visokotemperaturna dugotrajna mast 800g
2.862,59 € cijena bez PDV-a Isporučivo
Recenzije
Još nema recenzija.