Klüber PARALIQ GTE 703 Synthetic grease for valves and fittings 60g

PARALIQ GTE 703 Synthetic lubricating grease for valves & amp; fittings with EPDM seals | N° 022148

• PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
• The product is registered as NSF H1 and complies with FDA 21 CFR § 178.3570.
• It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries, thus contributing to the reliability of your production processes. Nevertheless, we recommend to conduct an additional risk analysis, e.g. HACCP.
• Temperature range: -50°C to +150°C
• Volume: 60g tube
• Also available in: 500g cartridge, 750g can, 25kg bucket

Benefits for your application

• A reduction in your lubricant inventory with one lubricant which can be considered for both seals and rolling bearings
• Good compatibility when coming in contact with EPDM seals or even beer foam enhancing seal life and reduction in down time
• High resistance to many types of media such as disinfectants, cleaning agents, water, steam ensuring maximum protection of both seals and bearings, enhancing life and operating cost reduction
• NSF H1 registered supporting process reliability
• NSF ISO 21469 certified – supports compliance with the hygienic requirements in your production plant. You will find further information on ISO standard 21469 on our website www.klueber.com

Applications

• PARALIQ GTE 703 is a special grease suitable for beer taps, barrel filling installations and valves.
• It can be used for the lubrication of seals in the beverage industry whenever a H1 lubricating grease compatible with EPDM and complying with FDA is required. Additionally, PARALIQ GTE 703 can be used for rolling bearings subject to low loads.

Application notes

• PARALIQ GTE 703 can be applied by spatula, grease gun or directly from the tube.
• The lubrication technique for highly viscous lubricants should be chosen with great care: in the system used the intake of air should be avoided since otherwise the high pressures lead to oxidation and consequently decomposition of the product.

Technical specifications

Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com