Klüber STABURAGS NBU 12K Rolling and plain bearing grease 1kg can

SKU: ID0999e90adc
Isporučivo

277,56  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Isporučivo
Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

STABURAGS NBU 12K Rolling and plain bearing greases | N° 017085
  • STABURAGS NBU 12 K, 30 K are lubricating greases based on mineral oil and barium complex soap.
  • Both greases offer excellent corrosion protection, resistance to water and ambient media as well as wear protection, load-carrying capacity and resistance to tribocorrosion.
  • Temperature range: -15°C to +130°C 
  • Volume: 1kg can 
  • Also available in: 400g cartridge, 25kg bucket 
Benefits for your application
  • Good corrosion protection
  • Excellent resistance to ambient media
  • High wear protection
  • Good resistance to tribo-corrosion
  • Good load-carrying capacity
  • Good sealing effect
Applications
  • Klüber STABURAGS NBU 12 K is suitable for the long-term and lifetime lubrication of medium-speed rolling bearings, e.g. in mechanical engineering, power stations and motors.
  • Klüber STABURAGS NBU 30 K is suitable for the long-term and lifetime lubrication of low-speed, highly loaded rolling and plain bearings, mechanical engineering, chemical industry and power stations.
Application notes
  • These greases are applied by brush, spatula or conventional metering systems.
Technical specifications
 Chemical composition, thickener barium complex soap
 Chemical composition, type of oil mineral oil
 Lower service temperature -15 °C / 5 °F
 Upper service temperature 130 °C / 266 °F
 Colour space brown
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value 275 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value 245 x 0.1 mm
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 19 mm²/s
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 220 mm²/s
 Drop point, DIN ISO 2176, IP 396 >= 220 °C

Hazard Information (CLP)

Signal word: Warning

Hazard Statements (H-phrases)
  • H302 + H332: Harmful if swallowed or inhaled.
  • H317: May cause an allergic skin reaction.
Precautionary Statements (P-phrases)
Prevention:
  • P264: Wash skin thoroughly after handling.
  • P271: Use only outdoors or in a well-ventilated area.
  • P280: Wear protective gloves.
Response:
  • P304 + P340 + P312: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
  • P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
  • P362 + P364: Take off contaminated clothing and wash it before reuse.
Hazardous Components for Labeling
  • Barium salts
  • 4-Ethyl-2-(8-heptadecenyl)-2-oxazolin-4-methanol
  • Pin-2(3)-ene

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Downloads

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Klüber STABURAGS NBU 12K Rolling and plain bearing grease 1kg can”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)