Klüber Summit SH 68 Synthetic air compressor oil 20l canister

Klüber Summit SH 68 Synthetic air compressor oils | N° 050006

• Klüber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives.
• They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.
• Pack sizes: canister  20 l

Benefits for your application

• Low maintenance and operating costs due to extended oil change intervals up to 10,000 operating hours in oilinjected screw-type compressors
• Easy compressor oil conversion due to neutral behaviour of oils towards seals
• Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
• Longer servie life of the oil filters, activated carbon filters and oil separators
• Low formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter and
  separator life
• Reduction of energy costs due to more energy efficient operation

Applications

• Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours.
• Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils.
• They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected.

Application notes

• When selecting the oil viscosity for air compressors please observe the manufacturers’ instructions. When switching a used compressor to a Klüber Summit SH oil, drain old oil from whole circuit of compressor while still warm.
• We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit SH oil.

Technical specifications

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com