Klüberbio AG 39-602 Adhesive lubricant for open gears 25kg

Klüber Klüberbio AG 39-602 Environmentally acceptable adhesive lubricant for open gears and steel cables

• Klüberbio AG 39-602 contributes to long component life and good corrosion and wear protection.
• The finished product meets the biodegradability, minimally toxic and non-bioaccumulative standards established by the US EPA for the 2013 Vessel General Permit. 
• Klüberbio AG 39-602 contains > 60 % of renewable raw materials.
• Temperature range: -20°C to +100°C 
• Volume: 25kg bucket
• Also available in: Cartridge 400g, Can 1kg, Drum 200kg

Benefits for your application

• Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the 2013 Vessel General Permit
• Reduced environmental impact in the event of discharge into water. The base oil is derived from renewable resources
• Good adhesion and water resistance for long relubrication intervals
• Selected additives ensure longer component life and reduced wear
• Corrosion protection under seawater influence due to especially selected anti-corrosion additives

Applications

• Klüber Klüberbio AG 39-602 was developed for the lubrication of open pinion gears on winches and jack-up platforms, as well as steel cables in contact with water.
• The product can also be used in other maritime applications that require lubricants to have good water washout resistance, very good anti-corrosion resistance and/or good load-carrying capacity such as with low-speed plain bearings, guide rails and open winch gears.

Application notes

• Klüber Klüberbio AG 39-602 can be applied continuously through transfer lubrication with pinion or by brush.
• Compressed-air lubrication equipment can be used for the lubrication of steel cables.

Technical specifications

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com