Klüberbio LM 2-32 Biodegradable hydraulic fluid 200L barrel

Klüberbio LM 2-32 Eco-friendly hydraulic fluids | N° 009084

• Klüberbio LM 2 oils are fully biodegradable, eco-friendly hydraulic fluids based on synthetic ester oils.
• The product series complies also with the U.S. Environmental Protection Agency’s requirements for classification as an Environmentally Acceptable Lubricant (EAL) in terms of biodegradability, toxicity and bioaccumulation standards according to Appendix A of the EPA’s Vessel General Permit (VGP).
• In addition, Klüberbio LM 2 oils meet or even exceed the minimum requirements of HEES oils according to DIN ISO 15380. 
• Temperature range: -45°C to +110°C 
• Volume: 200 l barrel 

Benefits for your application

• Comply with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit).
• Fully biodegradable, non-toxic products reducing environmental impact in the event of leakage
• Facilitate start-up of hydraulic systems at very low temperatures due to very good viscosity-temperature behaviour and low pour point; can therefore be used in hydraulic systems with high temperature fluctuations. 

Applications

• Klüberbio LM 2 oils are intended for applications in mobile hydraulic systems, e.g. in the marine and offshore industries as well as for use in the building and water engineering sectors. They are also preferred in stationary hydraulic equipment operating in ecologically sensitive environments, e.g. in hydroelectric power plants and waterway locks

Application notes

• Klüberbio LM 2 oils meet ISO 15380 requirements in terms of compatibility with standard reference elastomers. Nevertheless, due to the large variety of materials available, compatibility with seals and paint coatings should be verified. In general, Klüberbio LM 2 oils are miscible with mineral oil based hydraulic oils. However, a miscibility test should be performed in order to rule out the possibility of an incompatibility between different additives. Prior to changeover, we recommend flushing the hydraulic system with the Klüberbio LM 2 oil. 

Technical specifications

Klüberbio LM2-32, Klüberbio LM 2 32

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com