Klüberbio RM 2-150 Biodegradable oil for stern tubes 200L barrel
10.791,00 € cijena bez PDV-a
Pošaljite upit za ovaj proizvod

Imate li pitanja?
+385 98 1777 898Uvijek dostupni
Opis
Klüberbio RM 2-150 Environmentally compatible, synthetic stern tube oils | N° 009025
- Klüberbio RM 2 oils are ultimately biodegradable oils for stern tubes based on synthetic ester oil showing good ageing and oxidation stability.
- Klüberbio RM 2 oils show a high shear stability and form a strong hydrodynamic oil film even when subject to high loads.
- Temperature range: -25°C to +120°C
- Volume: 200 l barrel
- Also available in: 1 l can, 20 l canister
Benefits for your application
- Comply with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit)
- Ultimately biodegradable and not toxic to marine organisms with more than 90% renewable raw materials
- High operational reliability due to the formation of a strong, hydrodynamic oil film and a very good compatibility with FKM elastomers available from leading propeller shaft seal manufacturers
Applications
- Klüberbio RM 2 oils were developed for the lubrication of propeller bushes made of white metal and propeller shaft seals.
- Klüberbio RM 2 oils are tested and approved by all leading propeller shaft seal manufacturers.
Application notes
- In general, Klüberbio RM 2 oils are miscible with mineral oil based stern tube lubricants. However, a miscibility test should be performed in order to totally rule out the possibility of an incompatibility between different additives. Prior to changeover, we recommend flushing the stern tube with the Klüberbio RM 2 oil.
Technical specifications
| Manufacturer number | 0090250335 |
| Service temperature, lower limit | -25 °C |
| Service temperature, upper limit | 120 °C |
| Density, DIN 51757, 20°C | approx. 0.92 g/cm³ |
| Flash point, DIN EN ISO 2592, Cleveland open cup | ≥ 250 °C |
| ISO viscosity grade, DIN ISO 3448, ISO VG | 150 |
| Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | approx. 18 mm²/s |
| Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 150 mm²/s |
| Viscosity index, DIN ISO 2909 | approx. 135 |
Klüberbio RM2-150, Klüberbio RM 2 150
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Recently Viewed Products
Klüberplex SK 12 Special lubricating grease for plain bearings 1kg can
287,84 € cijena bez PDV-a Isporučivo











Recenzije
Još nema recenzija.