Klüberfluid NH1 4-005 Synthetic barrier fluid for mechanical seals 20L

Klüberfluid NH1 4-005 Synthetic barrier fluid for mechanical seals | N° 029066

• Klüberfluid NH1 4-005 is based on a synthetic hydrocarbon oil and was developed for the lubrication of mechanical seals operating under various conditions in the chemical and pharmaceutical industries.
• Klüberfluid NH1 4-005 is NSF H1 registered and therefore in compliance with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. 
• Temperature range: -55 °C to 150 °C
• Content: 20 l canister
• Available in 1 l can, 200 l barrel

Benefits for your application

• No build-up of deposits if the product is used according to the intended purpose in mechanical seals due to the advanced synthetic oil formulation
• ISO 21469 certified – supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website.

Application

• Klüberfluid NH1 4-005 can be used as a barrier fluid in mechanical seals operating under inert gas conditions. Mechanical seals have been used in mixers, driers, mills, kneaders, reactors and pumps in the chemical and the pharmaceutical industry for many years.
• Klüber Lubrication offers a range of oils that were especially developed for use as a barrier medium in mechanical seals. The more the seal is stressed in terms of pressure, speed and heat, the lower should the oil’s viscosity be. For naturally circulating barrier fluids, the selected oil viscosity is normally approx. 5 mm²/s, as is the case with Klüberfluid NH1 4-005.

Technical specifications

Hazard Information (CLP)

Signal word: Danger.

Hazard Statements (H-phrases)

• H304 May be fatal if swallowed and enters airways.
• H332 Harmful if inhaled.

Precautionary Statements (P-phrases)

Prevention:

• P261 Avoid breathing vapor.
• P271 Use only outdoors or in a well-ventilated area.

Response:

• P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor.
• P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
• P331 Do NOT induce vomiting.

Storage:

• P405 Store locked up.

Hazardous Components for Labeling

• 1-Decene, dimer, hydrogenated

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com