Klüberplex BEM 41-132 High-temperature and long-term grease 1kg

Klüberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.

• Content: 1kg tin
• Color: yellow
• Available as 120ccm cartridge, 400g cartridge, 1kg tin, 170kg barrel

Benefits for your application

• Longer service life due to special wear additives for roller bearings
• Less maintenance
• Versatile grease due to wide operating temperature range and optimised oil release

Application

• Klüberplex BEM 41-132 can be used for long-term or lifetime lubrication of rolling bearings at operating temperatures between 70 and 110 °C.
• For rolling bearings with a high degree of sliding friction, e.g. tapered roller bearings, cylinder roller bearings, spherical roller bearings
• For-life lubricated deep groove ball bearings and rolling bearings e.g. in paper-making machines (dry section), textile machines (dry section), electric motors, hot air blowers drying ovens, air separators in the base materials industry, generators in wind power plants
• Rolling bearings in vehicle components
• Clutch bearings
• Generator bearings
• Water pump bearings
• Fluid fan bearings

Technical specifications

Lubricating greases -K, DIN 51825 in connection with DIN 51502	KPHC2N-30L
Chemical composition, thickener	special lithium soap
Chemical composition, type of oil	synthetic hydrocarbon oil
Chemical composition, type of oil	mineral oil
Lower service temperature	-40 °C / -40 °F
Upper service temperature	150 °C / 302 °F
Color space	yellow
Density at 20 °C	approx. 0.90 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	265 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	295 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 120 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 14 mm²/s
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:  1 week, distilled water	<= 1 corrosion degree
Drop point, DIN ISO 2176, IP 396	>= 250 °C
Speed factor (n x dm)	approx. 1 000 000 mm/min
Oil separation, DIN 51817 N, after 7 d/40 °C	<= 4 % by weight
Testing of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt. 02, speed: 6000  min-1, axial load: 1500 N, temperature: 150 °C, service life F50:	>= 100 h
Low-temperature torque, IP 186, -40 °C, start	<= 1 000 mNm
Low-temperature torque, IP 186, -40 °C, running	<= 200 mNm
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened  original container, approx.	36 months

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com