Klüberplex GE 11-680 Adhesive gear lubricant 1kg can

SKU: ID6ff4b1d1ab
Isporučivo

215,85  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Isporučivo
Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

Klüberplex GE 11-680 Adhesive gear lubricant | N° 039060
  • Klüberplex GE 11-680 is an adhesive lubricant with a mineral oil base and an aluminium complex soap thickener.
  • It is resistant to high pressure and contains anti-wear additives, corrosion and oxidation inhibitors.
  • Klüberplex GE 11-680 is free of bitumen, solvents and raw materials containing lead.
  • Temperature range: 0°C to +140°C 
  • Volume: 1 kg can
  • Also available in: STAR 60cm³ cartridge
Benefits for your application
  • Adhesive lubricant
  • Free of raw materials containing lead or solvents
  • Resistant to high pressures
  • FZG scuffing load stage > 12
  • Anticorrosion properties
  • Applicable through automatic lubrication systems
Applications
  • Klüberplex GE 11-680 is designed for the lubrication of open and closed spur and bevel gears, lifting spindles, slideways and guideways, large chain drives and sliding bearings.
  • It is particularly suitable for elevated component temperatures and wherever adhesive lubricants containing solid lubricants should not be used.
Application notes
  • Klüberplex GE 11-680 should preferably be used for the lubrication of tooth flanks. It is applied to the gears through automatic spray systems. Smaller drives are also lubricated through positive drip-feed equipment, by brush or a hand spray equipment (e. g. with the Klübermatic LB spray gun). Splash lubrication is possible for components operating at low circumferential speeds (< 3 m/s).
Technical specifications
 Chemical composition, thickener aluminium complex soap
 Chemical composition, type of oil mineral oil
 Lower service temperature 0 °C / 32 °F
 Upper service temperature 140 °C / 284 °F
 Colour space brown
 Texture very soft
 Density at 20 °C approx. 0.94 g/cm³
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value  380 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value 420 x 0.1 mm
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 685 mm²/s

Hazard Information (CLP)

Signal word: Warning.

Hazard statements (H-statements)
  • H317 May cause an allergic skin reaction.
Precautionary statements (P-statements)
General:
  • P101 If medical advice is needed, have product container or label at hand.
  • P102 Keep out of reach of children.
  • P103 Read carefully and follow all instructions.
Prevention:
  • P280 Wear protective gloves and protective clothing.
  • P261 Avoid breathing mist / vapour / aerosol.
  • P272 Contaminated work clothing should not be allowed out of the workplace.
Response:
  • P302+P352 IF ON SKIN: Wash with plenty of water and soap.
  • P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
  • P362+P364 Take off contaminated clothing and wash it before reuse.
Disposal:
  • P501 Dispose of contents/container to an approved hazardous waste disposal site in accordance with local regulations.

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Downloads

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Klüberplex GE 11-680 Adhesive gear lubricant 1kg can”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)