Opis
Lubricating grease for drinking water fittings with EPDM elastomers
- special lubricating grease based on fatty oil and an inorganic thickener
- high load-carrying capacity and marked adhesiveness in cold and hot water applications
- meets the specifications of the European standard DIN EN 200 well above the required endurance of 200,000 load cycles at a closing force of 2.5 Nm.
- Size: 25kg bucket
- Also available as: Cartridge: 400g; Can: 1kg
Benefits for your application
- Special lubricating grease for hot and cold water fittings
- Especially suitable for spindle heads with EPDM elastomers
- Excellent adhesiveness and high load-carrying capacity
Application
- lubrication of all friction points subject to mechanical loads in spindle heads with EPDM elastomers, check and control valves, shower and heating fittings, and generally for the lubrication of seals that require a grease compatible with EPDM and in compliance with statutory drinking water regulations.
Technical Specifications
| Article number | 0121700177 |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 310 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 280 x 0.1 mm |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 12 000 mPas |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 6 000 mPas |
| Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C | 1 – 100 corrosion degree |
| Colour space | green |
| Density at 20 °C | approx. 1.00 g/cm³ |
| Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating | <= 1 – 90 |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. |
24 months |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Recenzije
Još nema recenzija.