Klübertemp GR ZLHT Long-term lubricant 1kg can

SKU: IDa36f2df765
Isporučivo

1.707,00  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Isporučivo
Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Category:

Opis

KLÜBERalfa GR ZLHT long-term grease 1 kg can Long-term lubricating grease, based on a perfluorinated polyether oil (PFPE) and thickened with polytetrafluoroethylene (PTFE), white, high viscosity index, wide service temperature range, resistant to aggressive media and vacuum influence.

Advantages:

  • Long component service life:
  • Over a wide operating temperature range;
  • In contact with aggressive media;
  • When using sensitive plastics;
  • In vacuum.

Applications:
Klüberalfa GR ZLHT is preferably used for the lubrication of plastics and seals, where it offers particularly low friction coefficients and a low tendency to slip.
This leads, for example, to lower frictional heating of dynamically stressed elastomers and thus to a longer component service life.
General behavior towards elastomers and plastics:
Lubricants based on perfluorinated polyether oils and polytetrafluoroethylene are generally considered neutral towards most elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless, compatibility with the materials should be tested, especially before series production.
Applications include:
Electric motor bearings with low start-up and high operating temperatures;
Clean room technology, e.g., slide valves, vacuum seals;
HVAC systems in the automotive industry;

Technical specifications
Article number090181
Chemical composition, type of oil 
Chemical composition, solid lubricant 
Lower service temperature 
Upper service temperature 
Density at 20 °C 
NLGI grade, DIN 51818 
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit  
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C 
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C 
Copper corrosion, DIN 51811, 24 h, 100°C 

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Klübertemp GR ZLHT Long-term lubricant 1kg can”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)