Elastosil N2189 Silicone Rubber RTV-1 black 310ml cartridge

SKU: ID881cccaf3e
Na zalihi

37,06  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

Moisture curing silicone rubber (RTV-1) heat resistance up to 200 °C | ELASTOSIL® N 2189

ELASTOSIL® N 2189 is a non-slump, one-part Alkoxy-cure silicone sealant, which cures at room temperature under influence of moisture. ELASTOSIL® N 2189 shows primerless adhesion to many substrates, in particular to cast magnesium. It exhibits good resisitance against mineral oils. 

Applications
  • Appliances Industry
  • Automotive, Aerospace & Railway
  • Bonding & Sealing
  • Electrical Components
  • Formed-In-Place-Gaskets (Wet Type)
  • Industrial Assembly
  • Ready-to-Use Silicone Sealants – General Applications
Characteristics
  • Flame retardant (meets UL 94 V-0)
  • Adhesion on cast magnesium
  • Recommended service temperature from -45 °C to 200 °C
  • 1-component system
  • Heat resistant
  • Neutral-cure
  • Non-slump
  • Oil resistant
  • One-component
Technical specifications
Uncured
 Color black
 Density 23 °C DIN EN ISO 1183-1 A 1.20 g/cm³
 Viscosity, dynamic D = 0,5 1/s 25 °C DIN EN ISO 3219 250000 mPa·s 
 Viscosity, dynamic D = 25 1/s 25 °C DIN EN ISO 3219 150000 mPa·s 
 Skin formation time⁽¹⁾ 15 min
 Extrusion rate – mass flow⁽²⁾ internal method 10 g/10s 
Cured
 Color black
 Density 23 °C DIN EN ISO 1183-1 A 1.23 g/cm³
 Hardness Shore A  DIN ISO 48-4 45
 Tensile strength⁽¹⁾ ISO 37 1.5 N/mm²
 Elongation at break⁽²⁾ ISO 37 200 % 

Curing Conditions: 14 days at 23 °C and 50 % rel. humidity, 2 mm sheet, no post-curing

Storage
  • The ‘Best use before end’ date of each batch is shown on the product label.
  • Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Elastosil N-2189, Elastosil N 2189 Black

 

Information on product safety (Manufacturer, Contact)

Wacker Chemie AG, Gisela-Stein-Strasse 1, 81671 München, GERMANY, +49 89 6279-0, [email protected], www.wacker.com

Downloads

Dodatne informacije

Property

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Elastosil N2189 Silicone Rubber RTV-1 black 310ml cartridge”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)