Bostik Simson Prep CS Primer 500 ml

Prep CS is a primer and is used in combination with a mounting adhesive.
The application of the primer is recommended for gluing hard PVC with Hightack or Superfix mounting adhesive.
A preparation of the substrate with Prep CS is necessary in these cases, since the putty would otherwise have too low adhesion to the substrate.
Prep CS is sold in a can with a capacity of 500 ml.

Specifications

• Color: Transparent
• Content: 500 ml
• Consumption: 10m² per can
• Optimizes the adhesive strength of assembly adhesive

Application

• Prep CS is required for the following combinations of materials and adhesives:
• Hard PVC when using Hightack or Superfix assembly adhesive.

---

Hazard Statements (CLP)

Signal word: Danger

Hazard Statements (H-Sentences)

• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H225: Highly flammable liquid and vapor.

Precautionary Statements (P-Sentences)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. Do not smoke.
• P261: Avoid breathing mist/vapors/aerosol.

Response:

• P370+P378: In case of fire: Use dry sand, dry chemical, or alcohol-resistant foam to extinguish.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.

Other Relevant Information

• Product must not be released into waterways.

 

Information on product safety (Manufacturer, Contact)

Bostik SA, 420 rue d’Estienne d’Orves, 92700 Colombes, FRANCE, +33 1 49 00 90 00, [email protected], www.bostik.com