Loctite SF 734 Acetone solvent-based liquid activator 150ml spray can

LOCTITE® SF 734 Acetone solvent-based liquid activator

LOCTITE® SF 734 is a light yellow-green to amber, acetone solvent-based, aldehyde-amine condensate and organocopper compound liquid activator used where the increased cure speed of LOCTITE anaerobic structural adhesives and sealants is required. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps.

Applications

• Especially recommended for applications with passive metals or inert surfaces and with large bond gaps

Characteristics

• Increases cure speed of LOCTITE anaerobic structural adhesives and sealants
• Low viscosity
• Solvent Based

Technical specifications

Hazard Statements (CLP)

Signal Word: Danger

Hazard Statements (H-phrases)

• H222: Extremely flammable aerosol.
• H229: Pressurised container: May burst if heated.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.

Supplemental Information (EUH-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary Statements (P-phrases)

• P251: Do not pierce or burn, even after use.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
• P211: Do not spray on an open flame or other ignition source.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P102: Keep out of reach of children.

Response

• P261: Avoid breathing spray.
• P280: Wear protective gloves/protective clothing.
• P337+P313: If eye irritation persists: Get medical advice/attention.

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com