Loctite EA M-31 CL MED Two Part Medical Device Epoxy Adhesive 50ml

SKU: IDedf3c778f5
Na zalihi

69,92  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

LOCTITE® EA M-31 CL is a 2-part, clear, colourless to slightly yellow, low viscosity, liquid epoxy adhesive which cures at room temperature once mixed, to form an ultra-clear adhesive bondline with excellent impact resistance and minimal shrinkage. 

  • Pack size: 50 ml double cartridge (Loctite no. 235021)
Application
  • Typical applications include bonding, small potting, staking and laminating applications. ISO 10993 approved for use in the medical industry.
Characteristics
  • ISO 10993 approved for use in the medical industry
  • Room temperature cure after mixing
  • Mix ratio Resin: Hardener (by weight) 100 : 46, (by volume) 2 : 1
  • Resistant to a wide range of chemicals and solvents and has excellent dimensional stability over a wide temperature range
  • Suitable where optical clarity and excellent structural, mechanical and electrical insulating properties are required
  • Bonds most materials including glass, optical fibres, ceramics, metals, and many rigid plastics
Technical specifications
 Part No 235021 (30673)
 FEA (Finite Element Analysis) Finite Strain, Viscoelastic
 Fixture Time 160.0 min.
 Mix Ratio, by Volume 2 : 1
 Shear Strength 21.4 N/mm²
 Technology Epoxy
 Work Life 30.0 min.

LOCTITE® EA M-31CL, LOCTITE® EA M31 CL, LOCTITE® EA M31CL, , LOCTITE® EA M/31 CL


Hazard Information (CLP)

  

Signal Word:

  • Warning (Part A) / Danger (Part B)

Hazard Statements:

  • H315 Causes skin irritation.
  • H317 May cause an allergic skin reaction.
  • H319 Causes serious eye irritation.
  • H314 Causes severe skin burns and eye damage (only Part B).
  • H411 Toxic to aquatic life with long-lasting effects.

Precautionary Statements:

  • Prevention:

    • P273 Avoid release to the environment.
    • P280 Wear protective gloves (Part A) / Wear protective gloves/clothing/eye protection/face protection (Part B).
  • Response:

    • P302+P352 IF ON SKIN: Wash with plenty of water and soap (Part A).
    • P303+P361+P353 IF ON SKIN (or hair): Remove all contaminated clothing immediately. Wash skin with water [or shower] (Part B).
    • P333+P313 If skin irritation or rash occurs: Get medical advice/attention (Part A).
    • P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing (Part B).
    • P337+P313 If eye irritation persists: Get medical advice/attention (Part A).
    • P310 Immediately call a POISON CENTER/doctor (Part B).
Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

 

Information on product safety (Manufacturer, Contact)

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com

Downloads

Dodatne informacije

Property

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Loctite EA M-31 CL MED Two Part Medical Device Epoxy Adhesive 50ml”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)