Klüber POLYLUB HVT 50 A Lubricant for gearwheels and chains 400ml

POLYLUB HVT 50 A Lubricant for gearwheels, chains and wire ropes | N° 081041

• POLYLUB HVT 50 A is a very viscous and permanently elastic lubricant based on mineral oil and solvents.
• Content: 400ml spray can

Benefits for your application

• Reduces noise
• No raw materials containing silicone, Adhesive lubricant
• Contains anticorrosion additive

Application

• Versatile adhesive lubricant for open gears, driving, control and conveyor chains, steering racks in e.g. knitting machines and guide rails in conveyors

Application notes

• Shake can well before spraying and allow the solvent to evaporate (approx. 15 min.). Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition. To ensure safe handling please refer to safety data sheet and can label. 

Technical specifications

Hazard Statements (CLP)

Signal word: Danger.

Hazard Statements (H-Sentences)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: May burst if heated.
• H304: May be fatal if swallowed and enters airways.
• H412: Toxic to aquatic life with long-lasting effects.

Precautionary Statements (P-Sentences)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.

Response:

• P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
• P331: Do not induce vomiting.

Storage:

• P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com