Klüber UNIMOLY PA Molybdenum disulphide spray paste 400ml spray

UNIMOLY PA Spray Molybdenum disulphide spray paste | N° 081045

• UNIMOLY PA Spray is a sprayable, highly concentrated solid lubricant paste of black colour.
• It is based on paraffin mineral oil, silicate and a solid lubricant mixture (MoS2 and graphite). No lead, cadmium, nickel, chromium or halogen raw materials are used for the manufacture of this product.
• UNIMOLY PA Spray protects against running-in damage in plain bearings, gears and bushings and prevents clattering of slideways.
• Temperature range: -10°C to +450°C 
• Volume: 400ml spray can

Benefits for your application

• Protects against running-in damage and prevents fretting
• Prevents clattering of slideways

Applications

• UNIMOLY PA Spray ensures smooth pressing-in of pins, bolts and sleeves and efficient lubrication of curved paths, profiled guideways, sliding guides and spherical plain bearings.

Application notes

• Optimum adhesion of UNIMOLY PA Spray is achieved by precleaning the friction point with a solvent to remove residues or anticorrosion films.
• Shake aerosol can before use and provide for adequate ventilation during application as explosive mixtures may form.
• Do not spray on a naked flame or any incandescent or hot material. Observe additional application notes on the safety data sheet and can label.

Technical specifications

Hazard Statements (CLP)

Signal word: Danger.

Hazard Statements (H-Sentences)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: May burst if heated.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H412: Toxic to aquatic life with long-lasting effects.

Precautionary Statements (P-Sentences)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.

Response:

• P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
• P331: Do not induce vomiting.

Storage:

• P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com