Klüber STABURAGS NBU 12 Bearing grease 50g
27,34 € cijena bez PDV-a
Pošaljite upit za ovaj proizvod
Imate li pitanja?
+385 98 1777 898Uvijek dostupni
Opis
Lubricating greases with excellent wear resistance
- STABURAGS NBU 12 is lubricating greases based on mineral oil and barium complex soap. This product is resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, it is resistant to corrosion, water and many diluted alkaline and acid solutions
- Content: 50g tube
- Available in 50g tube, 400g cartridge, 1kg can, 25kg bucket
Benefits for your application:
- Good corrosion protection
- Good resistance to ambient media
- Excellent wear protection
- Good resistance to tribo-corrosion
- Good load-carrying capacity
- Good sealing effect
Application:
- STABURAGS NBU 12 is efficient on medium-speed rolling bearings subject to humidity or ambient media.It is used on water pumps, wheel bearings and motors; and in the textile industry, on all wet processing equipment such as washing, mercerising and dyeing machines.
Product data:
| Article number | 17052 |
| NSF-H2 registration | 135 689 |
| Chemical composition, type of oil | mineral oil |
| Chemical composition, thickener | barium complex soap |
| Lower service temperature | -15 °C / 5 °F |
| Upper service temperature | 130 °C / 266 °F |
| Colour space | brown |
| Density at 20 °C | approx. 0,99 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 245 x 0,1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 275 x 0,1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 220 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 19 mm²/s |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 9 000 mPas |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 15 000 mPas |
| Drop point, DIN ISO 2176, IP 396 | >= 220 °C |
| Four-ball tester, welding load, DIN 51350 pt. 04 | >= 3 000 N |
| Speed factor (n x dm) | approx. 350 000 mm/min |
| Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating | <= 1 – 90 |
| Flow pressure of lubricating greases, DIN 51805, test temperature: -15 °C | <= 1 600 mbar |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | 60 months |
Hazards Information (CLP)
Signal word: Warning.
Hazard Statements (H-phrases)
- H302 + H332: Harmful if swallowed or if inhaled.
- H317: May cause an allergic skin reaction.
Precautionary Statements (P-phrases)
Prevention:
- P264: Wash skin thoroughly after handling.
- P271: Use only outdoors or in a well-ventilated area.
- P280: Wear protective gloves.
Response:
- P304 + P340 + P312: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
- P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
- P362 + P364: Take off contaminated clothing and wash it before reuse.
Hazardous Components:
- Dibarium(2+) ion bis(9-(octadecylcarbamoyl)nonanoate) decanedioate
- 4-ethyl-2-(8-heptadecenyl)-2-oxazoline-4-methanol
- Pin-2(3)-ene
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Budite prvi koji će recenzirati “Klüber STABURAGS NBU 12 Bearing grease 50g”
Related products
Recenzije
Još nema recenzija.