Klüber Summit PGS 68 Synthetic gas compressor oil 20l canister

Klüber Summit PGS 68 Synthetic gas compressor oils | N° 050027

• Klüber Summit PGS compressor oils are based on polyalkylene glycols and special additives.
• In high-pressure piston compressors for natural gas or hydrocarbon process gas, mineral oils are easily absorbed into, and diluted by, the gas stream. By contrast, Klüber Summit PGS compressor oils are extremely resistant to such effects.
• Pack sizes: canister  19 l

Benefits for your application

• For the lubrication of piston, screw-type and rotary vane compressors for natural and process gas
• Compared with mineral oils, extremely resistant to dilution and absorption by hydrocarbon gases
• Klüber Summit PGS-2 is ideal for heavy gases (densities > 1.5 g/cm³)

Applications

• Klüber Summit PGS compressor oils are suitable for piston, screw-type and rotary vane compressors for natural or process gas.
• Klüber Summit PGS-2 is ideal for hydrocarbon gases of densities greater than 1.5 g/cm³ because this product is extremely resistant to dilution and absorption by hydrocarbon gases.

Application notes

• Drain as much of the old compressor oil from the system as possible, making sure that the oil is drained while still warm. Do not forget to drain coolers, separator tanks and all lines. Next, clean or preferably change the filters. Then recharge with the appropriate Klüber Summit PGS compressor oil.

Technical specifications

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com